Evasi0n Jailbreak iOS 9.0.2
Facebook
Twitter
YouTube
  • Home
  • iOS 9.0.2 Jailbreak
    • iOS 9.0.1 Jailbreak Updates
    • iOS 9.0 Jailbreak Updates
    • Best Non Gamstop Casinos Uk
    • Casino Utan Spelpaus
    • Non Gamstop Casinos UK
    • Casinos Not On Gamstop
    • Non Gamstop Casinos
  • Jailbreak 8.4 Tutorial
    • Download TaiG iOS 8.4
  • iOS 8.4.1 Jailbreak
  • iPhone 6S Plus
  • Jailbreak 8.x Tutorials
    • Jailbreak 8.4 & 8.3
    • Jailbreak 8.1.2
    • Jailbreak iOS 8.1.2 (Mac OS X)
    • Jailbreak 8.1.1
Jailbreak 6.1.3 Untethered Evasion

Jailbreak 6.1.3 Semi UnTethered iOS on iPhone 4, 3GS, iPod Touch 4G

Home » iOS 6 » Jailbreak 6.1.3 » Jailbreak 6.1.3 Semi UnTethered iOS on iPhone 4, 3GS, iPod Touch 4G

March 19, 2013iOS 6, Jailbreak 6.1.3753 commentsEvasion Admin

Jailbreak 6.1.3 iOS Semi UnTethered on iPhone 4, 3GS, iPod touch 4G with Redsn0w - Following Apple’s release of iOS 6.1.3 today, a popular jailbreak tutorial YouTuber named iCrackUriDevice published an updated semi UnTethered jailbreak guide for the new firmware using a simple RedSn0w workaround. Unfortunately, because the Untethered exploits employed by Evasion are patched in iOS 6.1.3, this jailbreak remains exclusive to A4-powered devices and is Tethered by default, which we’ll explain later. If you own a newer iDevice on a previous version of iOS 6, including 6.0.1, 6.0.2, 6.1, 6.1.1 and 6.1.2, we strongly advise following our evasi0n jailbreak tutorial, as it includes untethered support for all devices.

Jailbreak 6.1.3 Untethered Evasion

As mentioned above, the Redsn0w Jailbreak is compatible with, and can jailbreak, the following iPhone and iPod touch models running iOS 6.1.3.

  • iPhone 4 (both GSM and CMDA models)
  • iPhone 3GS
  • iPod touch 4th generation

While the following newer iDevices are incompatible with this 6.1.3 jailbreak, they are still able to be jailbroken on all previous versions of iOS 6, even 6.1.2, using evasion.

  • iPhone 5
  • iPhone 4S
  • iPad mini
  • iPod touch 5th generation
  • iPad 4 powered by Apple’s A6X chip and Retina display
  • iPad 3
  • iPad 2

Furthermore, even though it’s possible to use redsn0w on 6.1.3, iPhone and iPod touch owners will only be able to jailbreak using what’s referred to as a “Tethered Jailbreak”. Consequently, devices jailbroken using this method will require Redsnow to boot into their fully jailbroken state every time they power off. However, it is possible to install what’s known as a semi Tethered or a Semi UnTethered jailbreak on iOS 6.1.3 after completing this tutorial. This will allow the iPhone or iPod touch to reboot without the assistance of a computer with limited functionality. If you’ve previously jailbroken using a tethered version of redsn0w, jailbreaking 6.1.3 should be easy for you.

Now that you know the limitations of Redsn0w, to be immediately notified on any and all news pertaining to the status of the UnTethered evasion jailbreak for newer firmwares like 6.1.3, subscribe to our official iOS 6.1.3 UnTethered feed.

Important Jailbreak Prerequisite

Before continuing with this semi Untethered jailbreak tutorial, ensure that you have the following:

  • An older iDevice (remember, only the iPhone 4, iPhone 3GS and the iPod touch 4G are supported) running the latest iOS 6.1.3 firmware from Apple.
  • The RedSnow 0.9.15b3 jailbreak utility and your device’s corresponding 6.0 firmware file.

Additionally, while mentioned above, it’s worth reiterating that this is a Tethered jailbreak, which requires additional effort on your part and doesn’t support newer iPhone, iPad and iPod touch models. If at all possible, we recommend staying on a lower iOS 6 firmware and jailbreaking with evasion - iOS 6.1.2 is ideal because it’s the latest firmware supported by evasi0n.

How to Jailbreak iOS 6.1.3 Semi UnTethered Using Redsn0w

Step 1: Download Redsn0w from our download section, which is linked below, to ensure that you have an authentic version of the tool.

Step 2: Once Redsnow has been successfully downloaded, if you’re on Windows, right click the utility, set compatibility mode to Windows XP Service Pack 2 and grant the program administrative privileges. Mac users needn’t worry about compatibility, as practically all versions of OS X  can use the utility immediately after downloading it.

Step 3: Run Redsn0w and click Extras, followed by Select IPSW. In the pop-up window, simply point Redsnow at the iOS 6.0 IPSW, not 6.1.3. After the firmware has been successfully identified, click the Back button to return to the main Redsn0w menu.

Step 4: Click the Jailbreak button, ensure that the option to, Install Cydia was checked by default and continue to the next screen. At this point, Redsn0w suggests turning your device off to enter DFU mode, although it’s possible to bypass this stage of the jailbreak entirely by entering DFU mode ahead of time.

Step 5: To enter Device Firmware Update mode, simply connect your iPhone or iPod touch via a standard 30-pin USB cable, press and hold both the home and power buttons for a total of ten seconds. Once ten seconds has passed, release the power button and continue to hold the home button for an additional ten to fifteen seconds.

Step 6: If you’ve entered DFU mode correctly, Redsnow will automatically proceed. Simply wait for the process to complete and for your jailbroken device to reboot, after it has, you’ll need to boot Tethered.

How to Boot iOS 6.1.3 Tethered iPhone 4, 3GS, iPod touch 4th Gen

How to Jailbreak 6.1.3 iOS Untethered

As previously mentioned, you’ll be required to boot tethered for Cydia to appear and every time you need to reboot your iPhone or iPod. To boot Tethered, simply open RedSn0w, click Extras, followed by Select IPSW, point the RedSn0w window at the iOS 6.0 IPSW and select the option to Just Boot.

When you arrive at the stage that requires your device to enter DFU mode, follow the procedure outlined in the fifth step of this tutorial.

Jailbreak Downloads

  • Redsn0w 0.9.15b3 for Mac OS X  users
  • Redsn0w 0.9.15b3 for Windows-based PC users
  • iOS 6.0 IPSW for the Semi Untethered 6.1.3 Jailbreak
  • 6.1.3 file to restore your iDevice if it isn’t on the new firmware

Congratulations, after only six simple and easy-to-follow steps, you’ve successfully jailbroken your iPhone or iPod touch on iOS 6.1.3. Also, if you wish to install the package that converts this tethered jailbreak into a semi Untethered jailbreak, be sure to checkout iCrackUriDevice’s video, which is embedded above.

As always, thanks for following our jailbreak guide and don’t forget to subscribe to our Evasi0n Jailbreak and iOS 6.1.3 UnTethered news feed, like us on Facebook, follow us on Twitter and add us on   to be quickly notified when we post new articles pertaining to iOS, redsn0w and future jailbreak utilities.

Shares
  • Facebook
  • Twitter
  • Google+
  • Gmail
  • Yahoo Mail
  • reddit
  • Pinterest
Tags: 6.1.3 untethered jailbreak, download redsn0w, evasi0n, evasi0n 6.1.3, evasion, evasion 6.1.3, how to jailbreak, ios 6.1.3, ios 6.1.3 jailbreak, jailbreak 6.1.3, jailbreak ios 6.1.3, untethered 6.1.3

Related Articles

Beta 3 Released, Will TaiG Jailbreak 8.2 Post 8.1.2? Facts Examined!

December 18, 2014Evasion Admin

With iOS 6.1.3 Unable To Jailbreak, How Many Users Are On 6.1.2 Or Earlier?

August 1, 2013Evasion Admin

Apple Releases iOS 8.1, Can I Jailbreak 8.1 Untethered? A Jailbreaker’s Guide To Updating

October 20, 2014Evasion Admin

753 comments. Leave new

Cristin
September 2, 2015 6:31 AM

Your place is valueble for me. Thanks!? http://socialsurveysbonus.tumblr.com/post/128098188326/social-surveys-review-my-exclusive-bonus-make-it

Reply
how to delete google plus account permanently
September 20, 2014 12:23 AM

Hi, everything is going fine here and ofcourse every one is sharing data, that’s truly good, keep up writing.

Reply
pozycjonowanie stron gliwice
September 15, 2014 9:21 PM

Strona ?wiadczy o interesuj?cych zagadnieniach, namawiam do dyskusji Feel free to visit my web page :: pozycjonowanie stron gliwice

Reply
http://google.com/
July 25, 2014 1:08 PM

Usually I do not read article on blogs, but I wish to say that this write-up very forced me to try and do so! Your writing style has been amazed me. Thank you, very nice article.

Reply
download redsnow
July 19, 2014 10:41 PM

I don’t understand this article… You should check http://www.redsn0w.us/ for more details

Reply
Unlock iPhone
February 7, 2014 11:57 AM

When you are in Facebook on your i - Phone and looking at the main nine options you can see at the bottom that you are viewing the left hand panel of two panels. Clay Cat Designs Math - Pad 4 Practice Word Problems - This math app focuses on word problems that involve addition, subtraction, multiplication, and division. This app is available at the i - Tunes App Store for $0.

Reply
how to unlock iphone 4 apple
February 3, 2014 12:49 PM

There is certainly a great deal to find out about this subject. I love all of the points you have made.

Reply
Leap Motion Unboxing
January 1, 2014 9:37 PM

My partner and i debbie such as this RSS feed to seem forward to relish studying the mistake like have not the world wide web online marketers landscapes and i ll only one prime web site

Reply
Bishal
December 24, 2013 10:03 AM

I am new to jailbreak.I have never done before. I am using ipod touch 4g with ios 6.1.3 for a year long and finally i decided to jailbreak it. i downloaded the redsnow jailbreak and followed the steps BUT after selecting extras followed by select IPSW it doesnt show redsnow 6.0 IPSW. i tried to locate the downloaded file even then i cant get the file wat should i do. help me…

Reply
erez
November 20, 2013 12:25 AM

it’s work on iPhone 5?

Reply
pasiasty
November 16, 2013 1:37 PM

The video in step 6 doesnt exist anymore, how do i proceed?

Reply
Your Mom
November 13, 2013 8:58 PM

Thank you I’ve been looking for a 6.1.3 jailbreak forever!

Reply
Connor
November 13, 2013 6:32 PM

my iphone 4 with 6.1.3, i did every single step from the video and either it comes up with white words and then please wait all down and sits at that page till ever. or it will be at the loading screen at rebooting and nothing will happen.. been working on this forever to jailbreak and cant get it. HELP!!!

Reply
Al
November 13, 2013 12:03 AM

I think that behind this great delay JB for ios 6.1.3, there is nothing but the utter failure of the hackers to unlock these devices. the rest is just talk worthless crap

Reply
bajujay
November 4, 2013 9:58 AM

I’m having problems. I did this jailbreak before and it worked perfectly. but i recently restored my ipod touch 4th gen and did the jailbreak again. however when it’s in the stage where the walking pineapple is on the screen. it just says moving applications and jumps to the end of the loading bar and boots the device. not installing cydia either. can someone help me with this?

Reply
nizam
November 13, 2013 3:42 AM

after jailbreak justboot your phone with redsnow

Reply
jezza
November 2, 2013 10:20 AM

did the jailbreak and it went well exept for the boot stage. when it boots the phone stays black forever then redsn0w says Missing Keys.plist data for this build

Reply
SHANNON
November 7, 2013 7:21 PM

I keep having the same problem. Somebody replied down below but I dont understand what to do still. If you figure it out please let me know. Thanks

Reply
Richard
November 8, 2013 12:02 PM

I had same problem. but soon as i changed the compatibility mode of Redsn0w to XP Service Pack 2 all went fine.

Reply
abeng
November 16, 2013 12:04 AM

Just repeat step 3 and then klik Just Boot then follow the steps

Reply
noise cancelling headphones
November 1, 2013 2:22 PM

Good site you’ve got here.. It’s hard to find high quality writing like yours these days. I truly appreciate people like you! Take care!!

Reply
aimbot Download
October 18, 2013 12:05 AM

It is not my first time to go to see this web page, i am browsing this website dailly and get good facts from here every day.

Reply
giftcode
October 17, 2013 7:11 PM

Good day! Do you use Twitter? I’d like to follow you if that would be ok. I’m undoubtedly enjoying your blog and look forward to new updates.

Reply
candida diet
October 17, 2013 3:26 PM

Its like you read my mind! You seem to know so much about this, like you wrote the book in it or something. I think that you could do with some pics to drive the message home a little bit, but other than that, this is fantastic blog. An excellent read. I’ll definitely be back.

Reply
Mutants Genetic Gladiators Cheat
October 17, 2013 12:16 PM

I have read so many articles or reviews concerning the blogger lovers however this article is truly a nice post, keep it up.

Reply
Chang Dowers
October 14, 2013 9:45 AM

Hi actually good read through. I will need to admit aim pretty new to using WordPress well truly extremely new. Just starting for getting the hang of it. Reading your post has been very informative. I have to admit still not totally 100% percent clear in my head. So have just put your blog on my desktop so I can go straight to it and have another seem later.

Reply
Christopher
October 13, 2013 11:31 AM

I have only one question. Is there gonna be any solution about this semi - problem that is mentioned above? I have 3gs 6.1.3 and is very annoying to boot every time when my battery is dead or cydia crash..

Reply
??
October 12, 2013 9:15 AM

Hello! I simply wish to give an enormous thumbs up for the nice info you will have right here on this post. I might be coming back to your blog for extra soon.

Reply
Leeds
October 2, 2013 11:35 AM

I’ve done everything right but my ipod didnt change at all and there’s no cydia in it! what did i do wrong?

Reply
Charles Blackwell-Ball
October 1, 2013 6:53 AM

How do I undo unteathered jailbreak on iPod Touch.

Reply
Owen
October 1, 2013 9:48 AM

You have to restore your Ipod on itunes via your computer. It will get rid of the jail break, but unfortunately everything else with it.

Reply
jason
September 28, 2013 7:36 PM

i tried to do it on my iphone 3gs, but it say missing keys.plist data for this build. what should i do?

Reply
Rya
September 29, 2013 5:51 PM

I have the same problem! But I have iPod 4G. Help!!?? ):

Reply
spac3cat512
October 6, 2013 7:09 AM

The “missing keys .plist” is from using the wrong firmware. You need to select “extras” from redsn0w menu, then “choose ipsw”. Use the 6.0 ipsw even if your device is running on 6.01-6.1.3. Remember 6.1.3 is semi-untethered so you’ll have to boot tethered every time you reboot or power down. Use the 6.0 firmware for this also.

Reply
SHANNON
November 7, 2013 7:14 PM

Hi how do you choose a ipsw? when i click on it it opens to a folder and I dont know what to do? Can you please help? I dk what folder to select? Thank you so much.

Reply
Ermin
September 28, 2013 2:48 AM

Yeah, I have downloaded redsn0w v9.15b3 but when I click on extras -> select ipsw-> ios 6.0 then it says this ispw isn´t supported anymore What I should do ?

Reply
ochi
September 28, 2013 7:32 AM

install itunes (the app need to reconize you device or else it says unsuported version, fingerprint etc etc)

Reply
jeybe
September 27, 2013 5:04 PM

IapCracker doesn’t work any more ! Every time i try to use it the App stops working and just crash out !

Reply
jaydox
October 2, 2013 6:10 PM

yeah mate you got that right but i have found a few other ways the most recent one i started using is great i can download paid free and apps that apple banned and all that its the best way to quickly install the ipa files/ apps ect onto my phone hit me up if you need help man

Reply
ROYBOY
October 4, 2013 5:29 AM

Hey Man was reading your post. would really appreciate if you coyld lead me in the direciton to download banned apps and a easy way to install. Thanks Alot if so!

Reply
iPhone 3gs
September 24, 2013 4:50 PM

After jailbreak (6.1.3) cydia crashes on loading

Reply
Jake
September 23, 2013 2:51 PM

I followed all the steps, and they are fine. But my system is still 6.1.3, and I cannot install the apps when I use iTunes. What’s the problem?

Reply
Andy
September 23, 2013 12:36 PM

Can’t get it to work with a 3GS running 6.1.3 It is saying “Failed to Decrypt kernal” When Manually selecting a ipsw file I get the “Couldn’t find remote BLOBS for this device”

Reply
zeeshan
September 22, 2013 9:48 AM

my k7 security does not allow me to download evasion wht to do

Reply
cole
September 15, 2013 8:00 PM

i have clicked select IPSW but i cant find where to go next

Reply
Sunny
September 16, 2013 7:39 AM

I wanna jailbreak 6.1.3 Pls somebody help me or call me +8801682052822

Reply
jaydox
October 2, 2013 6:14 PM

i tried to call you from australia to help you with your jailbreak but you phone line is busy its easy to jailbreak ios 6.1.3

Reply
jim bob
September 17, 2013 9:27 PM

you have to download the ios 6.0.1 firmware package first. then when you pick “Select IPSW”, pick the downloaded file.

Reply
bobo
September 11, 2013 9:07 PM

i upgraded my iphone4 gsm to ios7 and what happen is the locationservice are not functioning..it said the location is not determine..i already look at setting-privacy and on location service but the problems still not solve..pless help me..i tried downgrade the ios6 but the problems still happen..what should i do??

Reply
jb
September 13, 2013 11:59 PM

Piece of shit site, i used what they said and all i got was 1. viruses and malware 2. some screwy search engine that forces itself onto every new tab i open 3. didnt even jailbreak my fucking ipod these guys need to look at their shit and get it fixed

Reply
jimates
September 14, 2013 1:25 AM

I don’t believe you got anything by using this jailbreak process.

Reply
Bobthe_builder85
September 14, 2013 10:02 PM

You can’t get a virus on an apple device!

Reply
Troy Starter
September 17, 2013 4:53 PM

For the computer, not the device

Reply
Jasonicus
September 23, 2013 5:50 PM

Yes you can. You Apple fanboys are clueless.

Reply
woweoowok
November 12, 2013 11:05 AM

no u cant

jimates
September 14, 2013 1:24 AM

bobo says This is a jailbreak page for ios6. We may know nothing about ios7

Reply
Daniel
September 10, 2013 6:49 AM

Does anyone know how to downgrade to iOS 6.1.2 from 6.1.3 i want a jailbreak from evasi0n but my iOS is to up to date and it will not allow me to plz help and email me

Reply
Jasonicus
September 23, 2013 5:50 PM

Not possible.

Reply
mo2men
September 9, 2013 4:24 PM

is there jailbreak for ios 6.1.4 on iphone 5

Reply
Unknown
September 6, 2013 3:43 PM

I have an iPod Touch 4g. I was wondering if that i backed up my iTouch right before jailbreak, then after jailbreak i restored using the backup if everything would be back to normal.

Reply
CARLOS
August 31, 2013 2:17 PM

Hi, i have done all of the jailbreak and i have boot tethered but, when it is all done, cydia doesn´t appear. what’s wrong?

Reply
shah
September 26, 2013 8:47 PM

ya me either..i also done the same thing but the cydia not appear on my home screen ..why??can somebody help us??

Reply
anon
August 25, 2013 9:29 AM

video doesn’t exist :[ well, at least now I have a tethered ipod…

Reply
where is kidney pain
August 24, 2013 4:19 PM

I’m amazed, I have to admit. Seldom do I encounter a blog that’s both educative and amusing, and let me tell you, you have hit the nail on the head. The problem is an issue that not enough folks are speaking intelligently about. I am very happy I found this during my hunt for something relating to this.

Reply
silentkiler
August 24, 2013 7:31 AM

is not work in iphone 4s A1387 ANY HELP plzz

Reply
KT
August 23, 2013 10:30 PM

Is there any way to downgrade Iphone 4s?? HELP

Reply
Shameer
August 23, 2013 6:49 AM

Please help me to find a solution, i did the jailbreak on my iphone 4 ios 6.1.2, now it is in soft tethered mode i wanted to make it untethred but my cidia is not working it is crashing when i opens, i tried to re-jailbreak but in redsnow when start’s JB it showing ” failed to decrypt kernel”. then i tried Evas0in it is not supporting to re jailbreak, i need an urgent solution for this please help me. Regards Shameer

Reply
Hj
August 22, 2013 6:47 AM

hi, i have done everything according to the instructions, but itunes show an error 1600, i try several times already

Reply
Jp
August 20, 2013 5:38 AM

Is it possible to do this if my sleep/wake button is broken? Im hoping it is not.

Reply
fin
August 20, 2013 1:26 PM

Yea you can make a dfu ispw in extras

Reply
Unkz
August 18, 2013 11:56 AM

Why why why why not for the Iphone 4S again…???? I suppose a 6.1.3 UTJB for iphone 4S would just be a dream ….. Nightmare ….

Reply
jame527
August 17, 2013 12:31 PM

after i download the new ISPW, and try and jail break it says “Failed to decrypt Kernel” what does that mean and how can i fix it?

Reply
stan p
August 16, 2013 11:36 AM

Hello, my screen says uplaoding first stage..how long does it usually stay on this screen? Was I suppose to still hold down the “home” button” while it says “uploading first stage”

Reply
BrianHernando
August 15, 2013 7:27 PM

Help, I press the select ipsw then it says I have none! I’m on Mac

Reply
Ghost
August 18, 2013 8:25 AM

You have to download them.

Reply
kyle
August 15, 2013 10:07 AM

My iphones been saying downloading jailbreak data for about 15 minutes, and redsnow says reebooting. how long does this normally take?

Reply
usuckcock
August 21, 2013 2:36 PM

forever! hahaha u suck

Reply
Wesley
August 14, 2013 9:35 AM

I Jailbroke my iPod touch 4G with iOS 6.1.3 and it worked perfectly fine, until I accidentally opened openappmkt (I had it from a tutorial for jail breaking and cydia that didn’t work, but I just didn’t delete it…) and then it just froze! I couldn’t use the lock or home button, but the screen still rotated AND I could take screenshots. Please help!!!!!!!!!!

Reply
Angel
August 14, 2013 1:46 PM

Can You explain this to me… These words make no sense to me and when I Download Redsnow This Thing comes Up With a Bunch of words and says This weird Stuff like “Reboot” And “Text, read me” HELP!

Reply
Wesley
August 14, 2013 3:04 PM

Watch the video tutorial then…..

Reply
yujie is awesome
August 19, 2013 6:58 PM

There should be a shortcut named boot-ipt4g for windows users. Simply select it and double click open as admin. hope this helped :)

Reply
abdoula
August 14, 2013 2:37 PM

put it into itunes and restore it by clicking restore and it will ease everything and it will start working

Reply
Wesley
August 14, 2013 2:54 PM

Nevermind! I force rebooted it and now it’s perfectly fine and still has jailbreak!

Reply
Eric
August 23, 2013 10:17 AM

WESLEY check my youtube channel on how to unlock the video will say WESLEY’s problem my youtube is Eric TheTechWiz

Reply
NAwab
August 13, 2013 7:31 AM

Thanks Evasi0n

Reply
Saddi
August 12, 2013 10:27 AM

Hi I got a Serious Problem and hope you can help me. Pls no noobish comments. I have got an iphone 4 32 GB and I restored it. 1.) iOS 6.1.3 2.) I Jailbreaked it with your instructions. 3.) Jailbreak Works, Its starts hisself and I can see Cydia and download Tweaks. 4.) But after 1 day or sometimes after 12 hours (never the same time, checked taht already) my Iphone always crashes. 2 Ways this is happening: 1st. I cant do anything and my screen is in frozen and after about 1 min it turns off and on again and I can see Cydia, but it opens and closes (not the Exit Safe mode) It looks like the normal appel Homescreen, no folders etc. 2nd. All my Icons look weird and it just turns off and on, or stays off and then i´m like above said back in the apple screen. “When” im lucky it get into safe Mode, and I stil can receive calls. But mostly not. Only way to get it back to work is: - if I open Redsnow, - select ispw 6.0 what I used like in the describtion , - then choose “just boot” I see the walking pineapple and my settings are back like I left at the crash. (I mean my Tweaks are still all there, even the settings in the Tweaks, like Statusbar Name etc etc.) I got my iphone only 4 weeks, so I a newbie but: I cant understand why my Iphone is keeps crashing I tried it with my Tweaks and without them. It always crashes. Not even crash reporter was a help. Only if I dont Jailbreak it and use normal Apple Settings its stable, but for the love of god, after I taste heaven I dont wanna live on earth again. :) So please help me: 1st. Why is my device keeps crashing 2nd. What can I do to fix it Thx. I sorry for my bad english, but I hope you get my problem and can help me.

Reply
Seth Hoisington
August 12, 2013 9:26 AM

I have a stitched IPSW of 6.0, but whenever i try to restore, i get error -1, even tho it is in Pwned DFU by iREB. PLEASE HELP

Reply
Shusham
August 13, 2013 6:26 AM

use an original Apple Cable

Reply
Fernando
August 11, 2013 6:56 AM

me sale que el ipws no es compatible con la versión de redsnow ¿que hago?

Reply
AnOnyon
August 12, 2013 5:56 AM

Dejate quitar sosegadito !

Reply
unlockiphoneservice
August 10, 2013 6:52 AM

Factory Unlock iPhone 5 4s 4 3gs all carriers Jailbreak iphone 5 4s 4 3gs ios up to 6.1.4 go to unlock-appleiphone.com best service

Reply
angelprone
August 8, 2013 11:59 PM

thanks for this one…it worked for me. even though it’s a tethered jailbreak at least i can install my favorite jailbreak apps…cheers!

Reply
Victor
August 8, 2013 12:59 PM

When is put select ipws 6.0 it says : That IPSW is not supported by this version of redsnow

Reply
Victor's Dad
August 8, 2013 5:08 PM

You’re doing it wrong Son. No breakfast for you BUT your mom still gets my cock.

Reply
carlos
August 11, 2013 11:17 AM

JAJAJA MUCHO HIJO DE PUTA

Reply
dmh
August 13, 2013 2:18 PM

Mine does the same thing. Any luck?

Reply
laith shunnar
August 6, 2013 10:37 AM

i tried to jailbreak ipod touch 4 ios 6.1.3 with sn0wbreezed when i try to restore with itunes after extracting firmware it says ipod cannot be restored because ipod software update server could not be contacted please help ?>??

Reply
rocko san
August 4, 2013 1:39 PM

guys Im trying to jailbreak my iphone 4 gsm and all , ive downloaded the firmwares and followed step by step the instructions with redsn0w, but when it comes to the “WAITING FOR REBOOT” part on the jailbreaking process it stops there and stays there for hours and does nothing else! I have the correct firmwares, I’ve tried restoring my iphone, rebooting my macbook, even desconecting my iphone and rebooting it manually, and nothing seems to work! Any ideas?? Hope for an answer.

Reply
Joel
August 5, 2013 12:32 PM

I’m in the same situation do not know what to do

Reply
guy
August 6, 2013 10:11 AM

change the compatibility to xp service pack 2

Reply
krish
August 6, 2013 8:34 PM

open redsnow goto extra click on select ipsw and select ios 6.0 than procced for jailbreak

Reply
sascha
August 8, 2013 3:00 PM

thx, work fine for me 😉

Reply
Jordan
August 2, 2013 6:44 PM

I’m using the 6.0 ipsw in redsn0w but I’m having the issue that once redsn0w runs on my device, I’m not getting the running pineapple screen, I’m just getting the regular Apple logo at start-up and my phone runs fine when it starts up after running the jailbreak. Cydia is nowhere to be found, and when I run “just boot” with the 6.0 ispw, it boots up with the pineapple, but Cydia still isn’t an app on my phone. I tried restoring the phone and then running redsn0w, but that didn’t work either.

Reply
rocko san
August 4, 2013 1:37 PM

guys Im trying to jailbreak my iphone 4 gsm and all , ive downloaded the firmwares and followed step by step the instructions with redsn0w, but when it comes to the “WAITING FOR REBOOT” part on the jailbreaking process it stops there and stays there for hours and does nothing else! I have the correct firmwares, I’ve tried restoring my iphone, rebooting my macbook, even desconecting my iphone and rebooting it manually, and nothing seems to work! Any ideas?? Hope for an answer.

Reply
Anonymous
August 2, 2013 1:09 PM

Howdy! I simply would like to give a huge thumbs up for the good information you could have right here on this post. I will probably be coming again to your blog for extra soon.

Reply
2012 nhl playoff schedule second round 2012 nhl playoff schedule start 2012 nhl playoff schedule tree 2012 nhl playoff schedule tv 2012 nhl playoff schedule wiki 2012 nhl playoff schedule wikipedia 2012 nhl playoff tv schedule 2012 nhl playoff tv schedule
August 2, 2013 12:39 AM

I like to disseminate knowledge that I’ve accumulated with the yr to help enhance group efficiency.

Reply
Anonymous
August 1, 2013 7:59 PM

Excellent notable analytical attention to get detail and may anticipate difficulties prior to they will occur.

Reply
P0sixninja's understudy
August 1, 2013 11:18 AM

I don’t understand why idiots are wanting 6.1.3 to be untethered. You dumbasses shouldn’t have upgraded in the first place. When are you twats going to realize that 6.1.3 WILL NOT and WILL NEVER BE untethered?

Reply
Ghjftj
August 3, 2013 7:27 PM

Fuk you

Reply
ityuytityui
August 4, 2013 5:09 PM

I was forced to get a new iPhone by the parents, and we were told they had 6.1.2 and lower, but low and behold, they had 6.1.3 I was cheated out of the ability to jailbreak you unintelligent idiot. My old iPhone had been fully jailbroken and customized Think before you type you idiotic twat.

Reply
Kym
August 12, 2013 5:51 AM

OMG!! A person who is actually smart!! YES!!

Reply
Jb
September 4, 2013 4:22 AM

Don’t forget after ios 6.1.3 was released apple started shipping the phones with 6.1.3 pre-installed so its not always the case of people upgrading

Reply
ThinkBeforeYouSpeak
September 25, 2013 2:20 PM

Hey, Mr. Rudeness. Not everyone got their iDevice before 6.1.3 was out. I got my iPod when it was already updated to 6.1.3. Now, your other info is wrong. There will soon be a 6.1.3 jailbreak because several developers are already working on it. ih8snow being one of them. Also, winocm has the jailbreak with vids proving so, he’s just trying to work the kinks out. Now, next time before you get your panties in bunch, you should think before you speak.

Reply
trevortrevor
July 31, 2013 2:21 AM

i have a 4s on 5.1.1 and baseband 2.0.12. does any know how i can jailbreak and unlock this so i can use a different sim.

Reply
shahid
September 8, 2013 12:11 PM

its easy to do it,download evasion the latest version,connect your 4s and the rest is history,then you will have cydia on your phone,open cydia,and type ultrasnow in the search,it will show you ultrasnow install ultrasnow,and their you go,you are now jailbroken as well as ulocked…best of luck

Reply
anodsopadsa
July 30, 2013 1:29 AM

TEAM VIEW DOIT FORME

Reply
rd
July 30, 2013 1:27 AM

wheres the video… cause there aint one

Reply
Jake
July 29, 2013 4:38 PM

I kept following the steps listed and couldn’t get past the “Waiting to Reboot” message. I found an alternate IPSW at ipswdownloader (dot) com for my iPhone 4 that I received after 2012. The IPSW was called iPhone3,2_6.0_10A403_Restore.ipsw instead of iPhone3,1_6.0_10A403_Restore.ipsw. The process listed above worked, but after boot I still didn’t have Cydia. I used the boot steps with the new IPSW and the “Just Boot” option in redsn0w and Cydia is up and working. Full signal and 3G.

Reply
Guy
August 7, 2013 6:43 AM

Got the same problem ,I’ll now try your method and see if it works for me

Reply
anonymous
July 28, 2013 8:31 PM

I think it’s really stupid that they can’t jailbreak 6.1.3, but can jailbreak ios7. Then, what about the people that don’t want ios 7? We’re gonna be forced to update, just because you all are too lazy to find a jailbreak for iOS 6.1.3? I really loved your jailbreaks, but now you guys seriously suck.

Reply
jimates
July 29, 2013 12:53 AM

It’s not that they can’t jailbreak it, it is that they don’t want to invest the effort, just to have Apple fix it again, when they know they are going to put the time in to jailbreak ios7.

Reply
Monkey
August 4, 2013 10:30 AM

They HAVE done an untethered jailbreak for 6.1.3 but they don’t want to release it yet as it will expose the exploits they’ve found in IOS7. Once IOS7 is released they will release the untethered jailbreak for IOS7 which will also work with IOS6.1.3. It is due out in the autumn so just be patient. If you want to to untether then downgrade from 6.1.3.

Reply
Kym
August 12, 2013 5:54 AM

They have got on, yes. Using same exploits for iOS 7 for 6.1.3/4, no. They are using completely different exploits. The exploits for iOS 6 was patched and can’t be exploited no more. C’ya 😀

Reply
mahjongg mahjonggs mahjongs mahlstick mahmal mahmudi mahoe mahoes mahoganies mahoganize mahogany mahogonies mahogony mahoitre maholi maholtine mahomet mahometan mahometry mahone mahonia mahonias mahound mahout mahouts mahratta mahseer mahsir mahsur mahu m
July 27, 2013 5:56 PM

I have a confident analytical eye for the purpose of fine detail and may anticipate issues before these people occur.

Reply
Anonymous
July 27, 2013 4:15 PM

I like to share knowledge that I have built up through the 12 months to assist enhance team performance.

Reply
Greenville Greenville North Greenwald Greenway Greenwell Greenwich Greenwich Mean Time Greenwich Time Greenwich Village Greenwich civil time Greenwich hour angle Greenwich mean time Greenwich stars Greenwich time Greenwich village Greenwood Greer Greerson
July 27, 2013 3:11 PM

I have an enthusiastic analytical vision designed for details and can foresee problems just before they take place.

Reply
Anonymous
July 26, 2013 7:40 PM

When i jailbreak this it jailbreaks with limerain, then when i do the just boot option with the correct ipsw selected, i get no cydia!?! ive reinstalled the jailbreak 3 times and every time i make sure install cydia is selected! Help please!!!!

Reply
Anonymous
July 26, 2013 7:44 PM

also, i know for a fact that l1merain is installed cause when i do the just boot option, the pineapple shows up!

Reply
bacteriaemia bacterial bacterially bacterian bacteric bactericholia bactericidal bactericidally bactericide bactericides bactericidin bacterid bacteriemia bacteriform bacterin bacterins bacterioagglutinin bacterioblast bacteriochlorophyll bacteriocidal ba
July 26, 2013 5:28 PM

Hiya! I simply wish to give a huge thumbs up for the good information you may have right here on this post. I will be coming again to your weblog for extra soon.

Reply
sean
July 26, 2013 5:21 AM

when i try to boot tethered, i can only get to the part where it says ‘exploiting with limera1n’. it then gets stuck and stays on that screen llater saying exploit failed. Please help!!!!

Reply
anynomous
September 8, 2013 1:52 PM

— same like me — i’m use iphone 4, ios 6.1.3_3,2(last two number perfectly forgotten for everyone, all they just talk about global ios 6.1.3 but not for the detail 3,1 or 3,2 or 3,3 ). using redsnow , ipsw 6.0_3,2 . all perfect until rise word RAM, then i saw “exploit failed” any clues?

Reply
Anonymous
July 25, 2013 6:30 AM

I like to disseminate information that I’ve accrued through the calendar year to help enhance group functionality.

Reply
Anonymous
July 24, 2013 11:48 PM

I like to disseminate understanding that I have built up with the calendar year to help improve team performance.

Reply
Eric
July 23, 2013 3:04 PM

It all works right until it gets to the reboot stage, Then my iphone 4 just starts to have that black glow and nothing happens. I have been waiting 8 hours for it it work and i have tryed it twice already

Reply
Kevin I.
July 30, 2013 8:34 PM

Same thing happens here.

Reply
Axel
July 20, 2013 11:00 PM

Stuck on Please wait.

Reply
Eric
July 23, 2013 3:04 PM

Is it the part where it says waiting for reboot?

Reply
Nat
August 3, 2013 10:39 PM

after i reboot it, it says that i need to find the IPSW. i’ve downloaded two of the same ones, but it never lets me actually select them! helppp

Reply
Anonymous
July 20, 2013 9:13 PM

Hello! I just want to give an enormous thumbs up for the good data you will have here on this post. I can be coming back to your blog for more soon.

Reply
nonglucosidic nonglutenous nongod nongold nongolfer nongospel nongovernance nongovernment nongovernmental nongraceful nongracefully nongracefulness nongraciosity nongracious nongraciously nongraciousness nongraduate nongraduated nongraduation nongrain non
July 20, 2013 12:49 PM

I like to disseminate information that will I’ve built up with the 12 months to assist improve group functionality.

Reply
abdghoffar
July 15, 2013 10:50 AM

can anybody help me i have the 3gs and i tried to jailbreak it but after i select the ipsw and i click jailbreak it says failed to decrypt kernel and i dont know what to do

Reply
Hans
July 20, 2013 2:39 AM

Use the ipsw 6.00 not the 6.01, than it works!

Reply
sibtain
August 24, 2013 2:12 AM

but in browse window i cudnt find ispw 6.00 file to open it

Reply
axel troberg
July 14, 2013 6:59 AM

how jailbreak 6.1.3

Reply
axel troberg
July 14, 2013 7:00 AM

how jailbreak iPhone4 6.1.3

Reply
Peter Pan
July 18, 2013 2:27 AM

now that is how we like our commenters! How far did you get? have you read the instructions above? Have you even tried anything yet?

Reply
Nanotek
July 12, 2013 1:35 PM

It stops at the first stage then it didn’t load anymore. Why ? I use this firmware (iPod4,1_6.0.1_10A523_Restore) on a iPod 4th generation

Reply
Jack
July 31, 2013 1:32 AM

You have to use the 6.0.0 firmware

Reply
Carol
July 11, 2013 9:18 PM

OMG!! I have just about drove myself crazy trying to figure out how to re jailbreak my device since I upgraded to 6.1.3 and had given up all hope until I just watched your video! You are amazing and I thank you so very much for helping me with this!!

Reply
fickled
July 10, 2013 11:06 PM

on my ipod 4 i got as far as the red snow instructions like “hold down the lock button for x seconds and hold the home button down and all of that, but my ipods lock button is broken. is there anyway that i can complete the jailbreak without the lock button??

Reply
Anonymous
July 20, 2013 2:00 PM

In Redsn0w go to extras And AT one of THE options is ipsw dfu click in Thatcher And select 6.1.3 ipsw it makers the ipsw after that go to iTunes - iPod And shift click iPod reset click in that dfu after that it is in dfu

Reply
palantino
July 10, 2013 4:19 AM

need a help from experts i have iphone 4 ios 6.1.3 baseband 4.12.05 i followed the intructions and i have jailbroken it but i cant get service on that its says no service is it with the phone or baseband and when i bought this phone i have geveysim to use but after jailbreak should i use gevey sim or plz help me guys i m stuck on that…… best regards palantino

Reply
Rebecca
July 10, 2013 10:26 AM

I don’t think that there’s any Gevey that works on that baseband/iOS version. Not on iPhone 4 anyways, so basically your Gevey is useless and you’ll have to go with IMEI unlock.

Reply
trevortrevor
July 5, 2013 4:28 AM

is there any way to unlock baseband 04.12.05 on an iphone 4? i have been able to jailbreak it but cant get it to accept a sim card?

Reply
Weltall
July 6, 2013 1:07 PM

If you have AT&T you really should go on ebay and get an unlock. They are sold for as little as 3 buck, if not less.

Reply
trevortrevor
July 6, 2013 4:17 PM

thanks but its locked to 3 network uk and cheapest unlock on ebay is over 70 euros. way over my budget

Reply
Jenny
July 10, 2013 9:58 AM

I have this problems too!! so near, but so far! Did you find anyway of resolving the problem? i have been quoted £90 for unlock from 3.

Reply
Rebecca
July 10, 2013 10:28 AM

Only IMEI unlock. What network is the iPhone locked to?

Reply
trevortrevor
July 10, 2013 12:30 PM

locked to 3 uk and have had no luck finding a reasonably priced imei unlock.

Reply
Thomas
July 4, 2013 5:51 AM

I have a Verizon iphone 4 and I can’t seem to get it to jailbreak. When I use the 3,2 version of 6.0 Cydia doesn’t show up. I’ve been trying for two days to jail break and getting really frustrated, can anybody help?

Reply
Thomas
July 4, 2013 7:36 AM

NOw I got it to jailbreak but it wont let me open cydia now after I reboot

Reply
goldmelodyvn
July 4, 2013 1:42 AM

That’s work great, thank you so much

Reply
waqas
July 9, 2013 12:19 AM

need ur help plz tell me how u do ?? :(

Reply
Anthony
July 3, 2013 2:44 PM

Unable to jailbreak iphone 4 cdma verizon, I have jailbroken an iphone 4 gsm with out any issues. Found that there is 3 different 6.1.3 IOSs GSM IOS = iphone3,1 Unsure = iphone3,2 Verizon CDMA IOS = iphone3,3 The felixbruns.de site does not have the correct iphone4 CDMA IOS. If you google iphone3 3_6.0_10a403_restore.ipsw you should be able to download the IOS.

Reply
trevor
July 3, 2013 4:51 AM

cant unlock iphone 4. i can jailbreak and use cydia but my phone wont accept sim card. its on 6.1.3 tethered jailbreak on 6.0. base-band 04.12.05. is there a way to get it to accept a sim card or is the base-band the problem?

Reply
Pedro
July 3, 2013 7:46 AM

I have the same problem as Trevor said, Might it be the Base-band?… All Jailbreak went ok except for the Sim Card… I tried Sn0wbreez but with no luck… Any idea?

Reply
hamdi
July 3, 2013 4:51 AM

hi.. i have iphone 4g i like to jailbreak with redsn0w but redsnow stop in patching kernel please help me !! widows 7 32 bits

Reply
Joel
July 1, 2013 8:15 PM

Kisiera saber si hay jailbreak para un iphone 4s para obetener cydia

Reply
Javier
July 3, 2013 7:55 AM

Hola amigo, si se puede hacer el Jailbreak para el 4s, pero como dice la publicacion, seria Semi UnTethered, si tienes dudas contactame

Reply
Daniel
July 1, 2013 5:38 AM

Hello, I have a problem. When on iphone appears black/white text, the phrase “Please wait” stays there too long (for half an hour). After it, my iphone starts and there is not cydia… well then I boot the device with redsnow again (DOING ALL THE STEPS, selecting right 6.0 ipsw) and the pineapple appers. But it also stays so long (1 hour) and then device start .. But Cydia IS NOT there. I dont know what to do. My dvice is Iphone 4 Please help me

Reply
Naqeeb
June 29, 2013 12:39 PM

damn! mahn! it works…:D:D:D thanq verymuch…:):)

Reply
Raji
June 27, 2013 11:50 PM

hi, i have a 3gs with 4.2.1 iOS… I am trying to upgrade it to the latest… Now I am confused and o whc software shud i use to jailbreak… Is it evasion or red snow? how do I find ut and how do I proceed…

Reply
parth chodvadiya
June 27, 2013 11:29 PM

i have apple ipod 4th generation and i dont have cydia, so give me tips to download cydia on my ipod touch…….

Reply
leon
July 5, 2013 12:24 PM

if you done the jailbreak as mention above, but you didnt see cydia, is just because you will need to do the ” JUST BOOT” STEP in order to get the cydia to appear, make sure you SELECT the IPSW!! many people just simply miss this, and failed.

Reply
SyncMaster
June 26, 2013 12:55 PM

i did it and working so freaking perfect :)

Reply
Lorz
June 26, 2013 5:36 AM

JAILBREAK IPAD 2! 6.1.3

Reply
Sian
June 25, 2013 10:10 AM

I have iphone 4 and am on 6.1.3 I cannot downgrade, I have download the semi-tethered jailbreak and it won’t run or do anything now. I’m not entirely sure where I go from here. I don’t have my SHSH blobs to downgrade to 6.1.2 if anyone knows a way around this with no original data that would be great. I’m very stuck atm if someone could help me that would be brilliant!

Reply
hamdi
July 3, 2013 4:55 AM

i have the same problem i dont have a shsh for downgrade please help how i can downgrade ??

Reply
Destin
June 24, 2013 2:46 PM

alright here’s the deal with people that cannot get the jailbreak to work, and never see a cydia installed (even after a “Just boot” from redsn0w). Just backup your phone on itunes, do a restore to factory default, then restore to your backup. Now jailbreak again and it should work. It may be an issue with previous jailbreaks interfering etc…

Reply
neil
June 20, 2013 4:18 AM

Hi , I am getting the error missing keys.plist data for this build: iphone 4 6.1.3 (GSM A1332), however everything worked fine until completely the semi tethering part, ie rebooting using / redsnow/extras/just boot anyone know how to repair ? seems i am stuck in semi tethered land/..

Reply
neil
June 20, 2013 4:19 AM

sorry for double post , chrome hung on me ! not a good morning ! :)

Reply
Azhar
June 29, 2013 1:23 PM

You are getting wrong when you are jailbreaking when redsn0w requires IPSW select 6.0 not 6.1.3 and always say OK for asking any queries from redsn0w after that select just Boot and inter in DFU mood and here you go …

Reply
sandeep
July 3, 2013 4:43 AM

I TRY EVERY THING BUT ITS GETTING STUCK ON APPLE LOGE THT ITS ITS NOT GETTING IN MEN

Reply
Syriano
July 7, 2013 4:24 AM

-Important: ipsw for iphone 4 gsm iPhone3,1_6.0_10A403_Restore -Important: ipsw for iphone 4 cmda iPhone3,2_6.0_10A403_Restore

Reply
lexicon101
June 20, 2013 4:14 AM

hey , I successfully used this method to my iphpne 4 GSM jailbroken, however when trying to complete the semi tethered part (at the end) redsnow is throwing up the missing keys.plist for data error for this build does anyone know a work around as I seem to be stuck in the semi tethered state.. Iphone 4GSM A1332 model

Reply
Simin
June 28, 2013 1:27 PM

I had this problem too. you should only click back, select IPSW 6.0 and just boot. then follow instructions.

Reply
Bill
June 19, 2013 6:51 PM

Stuck on uploading first stage how long are you supposed to wait a couple of hours before you give up iphone 4 6.1.3 verizon cdma several attempts with no luck

Reply
Bill
June 19, 2013 9:04 PM

My bad was using the wrong ipsw was using 6.0.1 not 6.0 sorry.

Reply
Leo
June 21, 2013 11:48 PM

where is the 6.0 ipsw? I only see 6.0.1

Reply
Azhar
June 29, 2013 1:24 PM

You have to download it from Apple.net

Reply
Katelyn
June 19, 2013 11:19 AM

I am to the point where the screen on my phone says “downloading jailbreak data” but it has been on this screen for awhile now. Any suggestions?

Reply
ali
June 19, 2013 8:55 AM

my iphone version is 6.1.3 and i want to save the shsh to downgrid to present version because i dont want this untethered jailbreak ….

Reply
ali
June 19, 2013 8:48 AM

hi it errors when i put my iphone in dfu mode (error with shsh blobbs) what should i do? i want to save my shsh in this version to downgrid my iphone to present version!

Reply
josleof
June 25, 2013 4:24 PM

ios 6.1.3 is the preent firmware -.-

Reply
Azhar
June 29, 2013 1:26 PM

Use sn0wbreez and save ur shshs blobs

Reply
MiM
June 19, 2013 12:58 AM

I’ve did it. All things working good and installed ultrasn0w from Cydia. but still “no service”. How can i solve it? Please help.. Iphone 3gs /Modem Firmware 06.15.00/

Reply
pankaj
August 13, 2013 11:31 PM

I also have the same problem, please help!

Reply
mardig
June 18, 2013 9:21 AM

redsn0w gets stuck on waiting to reboot after the second package. Any solution?

Reply
Ck
June 16, 2013 8:40 PM

When the 6.1.3 Untethered will release? can’t wait for that

Reply
soapito
June 18, 2013 3:29 AM

i think they won’t release for 6.1.3.. They will keep the exploits for iOS 7

Reply
Erik
June 16, 2013 6:30 AM

Waiting for the iPhone 4s 6.1.3 Jailbreak! Hope it will come soon :-)

Reply
Jayden
June 14, 2013 6:46 PM

Hey, everything worked for me, except after the just boot, the pineapple logo popped up, I waited for about 5-10 minutes, then I unlocked my iPhone 4 and Cydia was not there. PLEASE HELP!!!!

Reply
Sekhon
June 19, 2013 5:09 AM

Same here

Reply
syty
June 25, 2013 7:25 AM

i had similar issue. It turned out i used wrong ipw file. My phone is 3.1 and i used 3.2 after getting proper software file it was fine.

Reply
Nyco
June 14, 2013 3:51 AM

Hey !!! I fo

Reply
Farhaad
June 13, 2013 11:50 AM

So here’s my situation: I have an ipod touch 4g on 4.3.3 (its jailbroken for the past 2 years, YAY) But now many apps require higher ios version to work. I do understand one of my options is to update via itunes to 6.1.3 the get the above mentioned tetherd redsnow jb. BUT is there any other option? Maybe its possible to get my ipod onto ios 6.1.2? 6.0.0? Even 5? Any1? Any help welcome

Reply
Zeb
June 12, 2013 9:58 AM

Sorry forgot to mentions its been saying “waiting to reboot” for around 20 minutes now and the screen is blacked out. this is my fourth attempt now.

Reply
Gian
June 15, 2013 10:31 PM

Same thing is happening with me. Have you figured it out?!

Reply
TheRock3412
June 22, 2013 3:20 PM

Turn it off then on try again

Reply
Jay
June 17, 2013 5:14 PM

Tried this step by step several times and redsn0w says “waiting for reboot” Sucks cus I can,t use my iphone 4

Reply
Jay
July 8, 2013 2:58 PM

Mine gets stuck during reboot and now my computer says Admin password invalid for redsn0w, do not have a password set up, what gives with that??

Reply
Zeb
June 12, 2013 9:56 AM

My phone wont boot into jailbreak mode, redsn0w is saying “waiting for reboot” this happened after i semi-tethered the phone. Before this it was working fine. Any ideas?

Reply
MrElectrifyer
June 13, 2013 3:12 AM

Just do as follows, forget about redsn0w: - Download both iFaith and Sn0wbreeze from “iH8sn0w com” - Use iFaith to download your iOS 6.1.3 SHSH blob if you don’t already have it saved locally - Use Sn0wbreeze to download the appropriate iOS 6.1.3 firmware for your device if you don’t already have it saved locally - Use Sn0wbreeze to create a signed CFW, with the SHSH blob, for your device (it will save an iBoot package on your desktop) - Use Sn0wbreeze to place your device into Pwned DFU mode - Open iTunes and Shift+Restore to the newly created CFW for your device - Setup your newly restored iDevice as a new device - Use the iBoot package to boot tethered into Jailbreak state Don’t think Semi Restore works with iOS 6.1.3 when you start installing tweaks…

Reply
trevor
June 12, 2013 5:34 AM

hi, i have an iphone 4 on ios 6.0.1 and modem firmware 04.12.02. can i do an untethered jailbreak on this and if i can, what is the best way to do it so it can be used on another network provider. i don’t want to screw it up cause it is my nephews phone thanks

Reply
Jesus
June 11, 2013 10:14 PM

Step 3: Run Redsn0w and click Extras, followed by Select IPSW. In the pop-up window, simply point Redsnow at the iOS 6.0 IPSW, not 6.1.3. After the firmware has been successfully identified, click the Back button to return to the main Redsn0w menu. I don’t know what is the ipsw and i have gone to the link they game me but it makes no sense can i get help?

Reply
Jesus
June 11, 2013 10:19 PM

For a IPhone 4 ^

Reply
Dan
June 11, 2013 4:03 PM

It’s not pwned untill u get ipad 2,and3

Reply
MrElectrifyer
June 11, 2013 2:22 AM

Just tethered jailbroke a friend’s iPhone 4, installed Semi Restore resprung then installed the following jailbreak tweaks: - Rainstone Siri Port - Activator - iCaughtU Pro - PkgBackup - PwnTunes - SBSettings Rebooted and the iPhone 4 refused to boot into the non-jailbreak state; it was stuck at the silver Apple logo. Anyone have any suggestions on how to fix this? I know can boot tethered to get it working again, but that spoils the whole purpose of SemiUnthered…

Reply
MrElectrifyer
June 11, 2013 2:26 AM

Meant SemiUnthered where I typed Semi Restore…

Reply
Andrei
June 10, 2013 8:28 PM

Thanks man! everything works perfectly!!!:D

Reply
trevor
June 10, 2013 3:30 PM

hi, is there any way to jailbreak a 4s on 6.1.3 or if not is there a semi-tethered way been released anytime soon. i am stuck with 6.1.3, no blobs saved

Reply
loco
June 11, 2013 8:21 AM

go to unja1l.com and there is a unthered jailbreak for 6.1.3 and 6.1.4 all you have to do is a survey and it is easy to jailbreak.

Reply
trevor
June 11, 2013 1:23 PM

my dear friend your are but a fool if you think anyone would fall for your scam sights. go back to bed and let your dad climb back on top again and leave us in peace

Reply
Keim
June 26, 2013 8:00 AM

LOOOOOOL

Reply
malc dog
June 26, 2013 8:22 AM

LMAO HELLA FUNNY I WANT TO JAIL BREAK MY 6.1.3 ARRGH

Reply
Javier
June 10, 2013 12:45 PM

I updated my iphone 3gs to 6.1.3 via iTunes. However I’m overseas and want to unlock it. Should I wait for ATT to do so or is it better to jailbreack it by this method? If I jailbreack can I eventually restore? Thanks!!!

Reply
Gizmoddict
June 9, 2013 6:50 PM

jailbroke my iPod. To all Those getting ERRORs like the build is being processed or “keys plist missing”.Restart Red snow,Select your IPSW again and Boot Tether.It did it again and again and 4th time it worked.Also I have a shorter 6 mins tutorial on jailbreaking and semi untethering if you guys wanna check out

Reply
kumar
June 13, 2013 2:13 AM

hi, I have no access to video now, but want to know the version of IPSW you are using? I am trying with “iPod4,1_6.0_10A403_Restore” but no luck :( appreciate your help thanks

Reply
kumar
June 13, 2013 2:15 AM

thats for my ipod touch 4g with ios 6.1.3

Reply
mark
June 30, 2013 1:32 PM

uh.. I keep booying to get cydia app but nothing is happening,what do i do

Reply
marta
July 21, 2013 3:13 PM

Hey, I am working on this for 2 hours, because of plenty of errors that appeared. Now I am nearly done, but if I click on Cydia it opens and closes instantly… It’s enough to drive one to despair… Please help!!

Reply
me
June 9, 2013 2:13 PM

im stuck at ‘please wait while ur build is beind processed exploiting with limera1n’ and the progress bar is almost full it’s been 15 minutes

Reply
Gizmoddict
June 9, 2013 10:19 PM

Close red snow…Start it again,select the IPSW And click on boot tether.See my comment here with a video.It is a detailed tutorial

Reply
lolipop
June 9, 2013 12:27 PM

c’est super genial alert(‘Ceci est un super tuto’) ;

Reply
mohammadi novman
June 9, 2013 5:43 AM

wen i connect my iphone 4s by usb and open redsnow it shows jailbreak button light color and i’m not able to click jailbreak button and below it shows connected:thank u(6.1.3)and when i click extras and select that ios 6.0 firmware it shows that IPSW is not supported by this version of redsnow.. please help!!!

Reply
Steve
June 9, 2013 10:12 PM

this wont work for 4s owner we gotta wait :-(

Reply
Fernfox
June 10, 2013 2:17 PM

This jailbreak only works on iphone 4 not 4s. Use a older version like 6.0 and jailbreak with evasion.

Reply
alexa
June 8, 2013 8:27 AM

the applacation said failed to decrypt kernal

Reply
Lee
June 10, 2013 6:30 AM

Ya, me too.

Reply
Nicodemus
June 11, 2013 1:36 AM

Yeah..how do we fix this

Reply
ramesten
June 12, 2013 7:41 PM

just restart redsnow select iOS 6.0 then jusboot ived been there before and i know how it feels 😀

Reply
kapvip3
June 7, 2013 5:59 AM

i have done everything as u said. and completed all step and got my iphone4 semi untethered but my safari isnt working. whenever i open safari ,it showed up for 3 seconds and then gone,not working. please help guys..?? :(

Reply
Jim
June 7, 2013 8:39 PM

its simple, you are not doing the just boot correctly. Ispw first, then “just boot.”

Reply
Steve
June 9, 2013 10:14 PM

safari ,cydia and mail app won’t work with this that’s why keeps crashing

Reply
Gizmoddict
June 9, 2013 10:17 PM

It is because you need to boot tether it every time after the phone switches off and you reboot.Watch the tutorial I have posted in comments in which I discuss this problem

Reply
Nik
June 6, 2013 1:02 PM

Everything works fine but problem is with safari web browser.its not opening ,everytime i run safari it showsup for few seconds 2,4 then gone.please help what to do??i have iphone 4 6.1.3.. When ever any application try to install something it open the safari where its nt workingg.. Please help guys..please help everyone

Reply
Jim
June 7, 2013 8:45 PM

its simple, you are not doing the just boot correctly.Reinsert the Ispw 6.0 first, then do the “just boot.”

Reply
Nik
June 6, 2013 12:55 PM

I jailbroken my idevice and cydia is also working fine but the problem is my safari web browser isnot working..everytime when i try to open it ,it showsup for few seconds then nothing happen ,not able to open safari web browser after my 2nd reboot please help… :(

Reply
Rahul
June 6, 2013 4:23 AM

Hi, Guys please help me to solve my prob, I using iPhone 3GS ios 6.1.3 jailbreak BB 05.13.04, works perfectly only the thing is it’s Tethered every time i did restart i have to do just boot with redsn0w again and again , is there any way to do UnTethered, i cannot either downgrade to 6.1.2 because i don’t have 6.1.2 SHSH .or i have to start from begin jailbreak with evasi0n? I’m confuse here please give me advice. Thanks

Reply
SugarTits
June 12, 2013 11:00 AM

Hey Rahul was just wondering how you jailbroke your 3gs 6.1.3 . are you using ios 6.0 to do it? i dont mind tetherd, just trying to get to that point :)

Reply
Rahul
June 13, 2013 11:53 PM

Hi SugarTits,Yes, you can do it it’s easy, you need redsn0w 0.9.15b3 to jailbreak IOS 6.1.3 and IOS 6.0. Before begin i advice you to fresh restore from iTunes.Steps..Open Redsn0w>Extras>Select IPSW 6.0>Click Yes or no Depending on your iPhone model.>Click back>jailbreak>Install cydia> after done install cydia repeat process again select ipsw 6.0 again and >jailbreak>install ipad baseband> once done repeat once more>select ipsw 6.0>back>jailbreak>downgrade from ipad baseband>… you done….after process open cydia > search ,ultrasn0w and install …. put sim card you are done… every restart open redsn0w again select ipsw6.0 and click on just boot. hope you understand,Sorry for my upside down English

Reply
Yoselin
June 6, 2013 4:23 AM

help im stuck at the pineapple logo after just boot..

Reply
Mass
June 6, 2013 2:39 AM

Bah.. iPhone 5 : 700 and more €uros for a programmed obsolescences idevices. ( apple is talking about that the “5s” probably released during 2013. no more iDevices in my future.. or Samsungs devices are better, a lot of roms to choose etc.

Reply
Yoselin
June 5, 2013 9:11 PM

So I accidentally booted my iphone 4. now is stuck in the apple logo.. it was jailbroken already.. how can i make it work with out loosing any of my data.. or will i still lose my data?? please help.

Reply
Ganesh
June 8, 2013 11:44 AM

just press power button and home button for ten seconds and reboot… problem solved:)

Reply
jak
June 5, 2013 10:45 AM

when i select “jailbreak” it doesnt work ….why? please help me …thanks

Reply
Leo
June 5, 2013 8:52 PM

maybe you didn’t use the right ipsw it must be the 6.0

Reply
trevor
June 4, 2013 5:36 AM

i screwed this up somehow and now only get error -1 on iphone 4 when trying to restore to latest ios. i can restore to 5.1.1 but have greyed out wifi and no service no blutooth and no emei number? HELP!!!

Reply
Leo
June 5, 2013 8:54 PM

i can’t understand how did that happen, never seen this

Reply
trevor
June 6, 2013 2:00 AM

i honestly have no idead. its driving me crazzzzy. can not find a solution. was watching tv while doing the jailbreak so i must have done something wrong somewhere.

Reply
Jeff
June 6, 2013 9:32 AM

I had the same issue too. i ended up restoring to 5.1.1 then updating to 6.1.3 from within my phone.

Reply
Phinet
June 2, 2013 8:34 PM

How to install v-share without jailbreak my iPhone

Reply
alx
June 5, 2013 6:36 PM

srry about that, you need to have app synce from cydia to use vshare

Reply
Austin
June 2, 2013 1:00 PM

It almost broke my iPod it shut it down and said it couldn’t work! Don’t try it!

Reply
Nick
June 3, 2013 8:38 PM

It bricked my iPod a lot of times but today I tried again and I successfully jail broke it

Reply
D# Sharp
June 1, 2013 7:21 PM

My itouch 4g keeps getting stuck at either “waiting to reboot” or this: “Missing keys: ecid: 3764019314126 Build: iPod4,1_6.1.3_10B329” No idea what this means at all… so confused! someone please help! I’ve been trying to figure this out for weeks!

Reply
Dayne
June 1, 2013 5:11 PM

I did all the steps and everything went fine, excepte it never displayed the running pineapple when you first jailbreak and Cydia never installed. Help?

Reply
Leo
May 31, 2013 9:00 AM

I was able to upgrade my iphone 4 GSM from ios 5.1.1 baseband 04.10.01 to 6.1.3 and its running fine, this is a great tutorial. If you do exactly what says in this tutorial (and the vid if you like me need to use the gevey sim) it’ll work 100%. I had some issue like failed decrypt kernel, but it was cause i was using the wrong ipsw to do the jailbreak part, after i use the right one it worked on 1rst try. NOTE: If you want to upgrade from a eaerlier ios (with a suported device) to the 6.1.3 first use the sn0wbreeze to make a custom ipsw to restore on itunes (holding shift buttom to select it), then you can do the process of this tutorial. Thanks a lot

Reply
DrJDorian
May 30, 2013 9:55 AM

It gets stucked on the “Uploading Ramdisk” screen. I’ve done everything, set in compatibility mode, set to CPU 1, run as administrator… i don’t know what to do

Reply
Leo
May 31, 2013 9:14 AM

Try to turn off firewall before using Redsn0w and make shure you put dfu mode right. Do this: hold for exactly 10 secs then release the power button and keep holding the home button for at least more 10 secs. You have to be shure to not release the home button before 10 secs.

Reply
hamxa bajwa
May 29, 2013 2:05 PM

whenever my phone hangs it restarts and gets stuck at endless bootloop then I have to hot boot my iPhone 4 to be able to turn it off then reboot it again with snow to be able to gain jailbreak. Am I missing a point in semi-tethered where it says you are able to use your device after a reboot without the help of a computer? can someone help to solve this problem?

Reply
Leo
May 31, 2013 9:12 AM

After rebooting without a computer cydia, cydia tweaks and safari doesn’t work. I would try to do the tutorial again to have it fixed, what is you iphone 4 baseband?

Reply
hamxa bajwa
June 6, 2013 5:03 AM

After re-jailbreaking my iPhone with redsn0w everything works fine. My problem is whenever my phone reboots it get stuck into a endless reboot unless I shut it down. My iPhone is factory unlocked I don’t know baseband does matter in this situation or not. Anyways it’s : 04.12.05

Reply
nik
May 29, 2013 11:37 AM

Im stuck in the uploading first stage for like two hours but nothing happen?whnever i try it my iphone 4 gives me the same stuck point at uploading first stage. what to do??

Reply
Jordan
May 29, 2013 6:10 PM

Hey bud, I had the same problems. Do you have the CDMA Model or GSM?

Reply
Leo
May 31, 2013 9:06 AM

On gsm (my case) it happened once but it was cause i did not put dfu mode right. Do like this: hold for exactly 10 secs then release the power button and keep holding the home button for at least more 10 secs. You have to be shure to not release the home button before 10 secs. Thus it should waork fine.

Reply
Jon
June 20, 2013 6:29 PM

thanks for the tip bud.

Reply
RedPilot
May 31, 2013 2:53 PM

I’ve tried 3 times and cant seem to get past the first stage, any other thoughts besides whats been said already?

Reply
Martin
May 28, 2013 1:56 PM

Apple just killed Evasi0n in iOS 6.1.3 and different jailbreak tool like Redsn0w couldn’t do anything better. But I have good news ! NEW VERSION of Evansi0n is here: thejailbreaksystems.blogspot.c­om It’s really works!

Reply
Mackem69
May 29, 2013 1:34 AM

This points to a fake download asking to complete a survey!

Reply
austrian
June 4, 2013 2:16 PM

fuck you idiot virus and fake site motherfucker

Reply
BloodRoze
May 28, 2013 10:16 AM

iPod T4 cracked useing this method. Restarted as requested. PROBLEM: When I try to add sources to cydia it goes through the whole list then stops (I let one go for over eight hours to see if I was just being impatient.) Still had to press cancel and it added the source but it was completely void of all packages. I’ve added several different sources and tried deleting them and re adding them. Cydia is also fully updated. Any ideas on how to make this work?

Reply
Leo
May 31, 2013 9:32 AM

Are you talking about bigboss source?

Reply
Jitesh
May 27, 2013 12:04 AM

Please wait while your build is being processed. Waiting for reboot. Above message comes twice, for the first time the progress bar moves quickly & looks like it has completed the process but, when it appears 2nd time the progress is not happening. It waits in above state forever. Any sugesstion.

Reply
jimates
May 27, 2013 5:43 PM

Mine did that with every attempt until I deleted everything and did a reset. Then it worked the very firt attempt. You could also do a restore with 6.1.3 instead of a reset.

Reply
Jitesh
May 28, 2013 11:28 PM

How can I delete & reset everything.

Reply
jimates
May 29, 2013 11:14 AM

Settings -> General -> Reset -> Erase All Content and Settings This will erase everything and put it back to factory. You can backup in itunes before doing a reset or new restore, then restore from the backup after jailbreak.

Reply
jimates
May 29, 2013 11:16 AM

If you do a reset on the phone, I suggest deleting all the apps manually first. It makes the reset go faster and more reliable. Never do a reset on a jailbroken device.

Jitesh
May 30, 2013 12:28 AM

Thanks for your reply, but i have stuck on welcome screen (The screen which comes when we upgrade the iOS.).

santosh
May 26, 2013 8:42 PM

hi above your video didnot apply on my iphone my iPhone 4 returned it in non jailbreak mode… please help me

Reply
The bag
May 26, 2013 12:11 PM

Stops at uploading first stage…. really creeping me out… Anyone know whats going on?

Reply
RedPilot
May 31, 2013 2:48 PM

Mine has done the same thing, there was post up above that talked about not putting it in DFU mode correctly and making sure you hold everything for 10sec but I’ve tried 3 times and haven’t been able to get past the first stage.

Reply
zaty
May 26, 2013 5:44 AM

can i jailbreak without using any carrier?

Reply
Dan
May 25, 2013 1:02 PM

I was wondering if you were ever going to jailbreak iphone 4 running 6.1.3 and if your not will we have the option to jailbreak untethered once 7.0 is out and the new jailbreak comes out

Reply
Peter Bassem
May 24, 2013 6:48 PM

Please wait… Please wait… Please wait… Please wait… Please wait… Please wait… Please wait… Please wait… Please wait… (Endless)!!

Reply
Alex V
May 27, 2013 9:00 PM

Mine Is doing the same and i need help!!!

Reply
icadnabil
May 24, 2013 10:47 AM

I waited for good news from your master to jailbreak iphone 3gs ios 6.1.3 untethered. I hope as soon as possible air out and it would really help me because I was stuck in ios 6.1.3. I am tired of having alternating forward computer network sim card to get me … but I sunguh thank you for the tutorial above so do not make me add lost for jailbrik

Reply
Baas Bas
May 24, 2013 10:31 AM

‘simply point Redsnow at the iOS 6.0 IPSW, not 6.1.3.’ I did all of the above steps and opened this window, but where, in which folder etc. do I find the IOS 6.0 IPSW?

Reply
Eder Rodrigues
June 3, 2013 7:21 PM

Nice question! I have the same doubt… Have someone got the answer? Tkx!!!

Reply
Jigger
May 23, 2013 8:00 PM

Can i jailbreak ipad 2 ios 6.1.3 ?

Reply
jimates
May 22, 2013 7:22 PM

anyone have success with n ipod 4. Redsn0w hangs at “waiting for reboot” and nothing from the ipod.

Reply
brandonsahacker
May 24, 2013 6:10 AM

i used sn0wbreeze to jailbreak my iPod touch 4. of course before i even downloaded any software i updated it ton 6.1.3, and i use ibooty to boot it. still looking for a semi jailbreak like evasion!:0

Reply
jimates
May 25, 2013 9:34 PM

I got it to work. I had to delete everything on the device and then do a reset. After that it jail broke fine.

Reply
Nick
June 3, 2013 8:46 PM

I had success with my jb today

Reply
Mahdi H
May 22, 2013 7:33 AM

Hi, I did something you have said above; but I don’t have Cydia on my iPhone 4. Could you please help me?

Reply
jimates
May 22, 2013 12:40 PM

After you jailbreak, go back to the extras in Redsn0w and “select ipsw” again. Then select “Just Boot”. When the phone boots Cydia should be there. When Cydia has the updates for the first time, I suggest updating them one at a time. Every time I updated them all together it messed up and would just hang during reboot.

Reply
jimates
May 21, 2013 9:02 PM

Every ios6 I download for ipod 4 is not an ipsw but several files and a folder named firmware with no firmware in it. I have downloaded from several pages I have used before for iphone.

Reply
jimates
May 22, 2013 11:38 AM

Well, I guess I am the only one that has ever had this problem. I have jailbroke many iPhones without a hitch, but there is nothing in the ipod download that REdsnow can use.

Reply
jimates
May 22, 2013 4:14 PM

OK, finally got it. I had to install Firefox and do the download. Now it stalls during the jailbreak “waiting for reboot” with no activity at all on the ipod.

Reply
JBrad
May 26, 2013 12:31 PM

you have to download the file using firefox instead of IE then it will download as an ipsw

Reply
trevor
May 21, 2013 5:14 PM

hi, have discovered an untethered jailbreak for 3gs on 6.1.3. i have tried it on 2 iphones and it has worked both times. i stumbled on it by accident but would be grateful if one of you could email me and try it out just to make sure i have not made a mistake. i have turned the phones on and off several times and cydia opens without a prob everytime.

Reply
Johnski
May 21, 2013 8:53 PM

Hi, I would like to test your “accident”. 😉 Could you just post what you’ve done?

Reply
trevor
May 22, 2013 3:01 AM

hi, i have contacted the sites admin to see if they can try it first and then post it here if it is a working jailbreak. i use an iphone 4 so have no sim to see if calls can be made on the 3gs phones after the jailbreak. i will leave it to better men than me to check it out and put it up here if its a fully working untethered jailbreak. i dont want to try it on my iphone 4 as i would honestly cry if it did anything to it.

Reply
brandonsahacker
May 24, 2013 6:13 AM

ill test it

Reply
Noviardi
May 21, 2013 1:24 AM

Thanks For F U C K I N G wasting my time.. The Procedure are finish at Redshow the Idevice are reboot with limited function either. So The adding Repo and Semi tethered are bullshit..

Reply
Wender
May 20, 2013 11:02 AM

All my apps are gone! Please help! And if i restore him in iTunes are my thousends of diamonds then gone in my games

Reply
popotan
May 20, 2013 10:31 AM

still no jailbreak for iphone 4S 6.1.3.?? :( i accidentally updated it && now my iphone is so boring as hell. T^T

Reply
falcon
May 20, 2013 8:51 AM

is it safe to downgrade my ipad to 6.1.2

Reply
falcon
May 20, 2013 8:49 AM

what is semi UnTethered is it safe?

Reply
jailbreakhacker
June 5, 2013 4:30 AM

semi unthered is one of the types of jailbreak which when your phone reboots or turns off or after you install a hack you are able to use the phone but you cant use certain apps because you have to go to redsn0w again and boot your phone

Reply
yash jain
May 20, 2013 6:29 AM

i am stuck at the part when its jailbreaking and after uploading second stage, the part where it says its waiting for reboot. what do i do.

Reply
Johnski
May 20, 2013 6:43 AM

Try a reset of your iphone (hold power and home button end release BOTH when screen turns off). Then start Jailbreaking at step 1. Shuld work now. Had the same problem and solved it like this. Maybe its even better to let the phone comepletely boot before turning in DFU mode again.

Reply
help with the jailbreak
May 19, 2013 9:13 PM

i followed all the steps and my ipod 4 on ios 6.1.3 is jailbreaked but cydia does not appear

Reply
Alex
May 19, 2013 9:56 PM

Try it again. Try it whole night and day. Read, learn, explore. No one said it’s plug and play. Try another computer. Try another OS. One process will run better on current Windows, other on Mac , third on XP. No one said You will have it, just open Your mouth . Apple does not protect You with or without jailbreak . Tech support will drag You same route You would read Your self on they website. It’s for Your entertainment only! You got free shoe laces- now You have to learn how to tie them up.

Reply
Lefog98
May 19, 2013 8:08 PM

I have to say, this is quite impressive! This is the third jailbreak I’ve tried to use, after evasi0n and sn0wbreeze, neither of which worked, then I tried this, and it works!

Reply
Vahid360
May 19, 2013 11:53 AM

Can i unjailbreak my iphone 4!?

Reply
edgar
May 19, 2013 4:58 PM

restore it man

Reply
Jaocb
May 19, 2013 8:33 AM

I try to jailbreak my i pod 4 6.1.3 but the “Waiting for reboot” takes so long I don’t know what to do, please help :)

Reply
Johnski
May 20, 2013 4:04 AM

Had the same problem once. Try a reset of your iphone (hold power and home button end release BOTH when screen turns off). Then start Jailbreaking at step 1. Shuld work now.

Reply
zunair ahmad
May 18, 2013 4:33 PM

thank you so much.

Reply
dert
May 18, 2013 4:20 PM

im unclear as to what the semi-tether does? i jailbroke my sprint iphone 4s with redsn0w and i am able to turn it on and off without installing the semi-tether…only thing is that the mail and cydia app wont work unless i boot with redsn0w

Reply
zaki
May 18, 2013 3:21 PM

i have i phone 4s with version 6.1.3 ,modem frimware 3.4.03 and i want to jalbreake my device ? if it possible now to jalbreake or not ?

Reply
Mingma Sherpa
May 18, 2013 2:18 PM

Hey, THank you first of all for providing us this wonderful tutorial to semi untether iphone. I followed your instructions and it worked!!!! Thank you so much, god bless you. Regards I will forward to my friends as well.

Reply
Ameer
May 16, 2013 11:20 PM

Hey! I followed all the steps and jailbroke my iPod 4G running IOS 6.1.3.I opened Cydia and opened sources like u said and added the source.The source was installed and then i installed semi tether but when it was installing an error occured and it said “Size mismatch” then i returned back to cydia.Ive been trying to install sources but this happens.I jailbroke my iPod two times now and this has been happening when I first jailbroke using this? method.Its been 4 months.Please help!!!

Reply
Shaggy
May 16, 2013 7:46 PM

The First time the reboot didn’t work, did all over again and had no problems.. Thanks!

Reply
nikitriki
May 16, 2013 6:45 PM

ok , it worked for me, i did exactly what the instructions says, the extra problems was. a) i jailbreak it with snow leopard 10.6.8.b) i changed the port of USB several times.c) the cable must be in a good condition, very important !!

Reply
nikitriki
May 16, 2013 6:48 PM

iphone4 6.1.3 semi untether jb , still unlock cos the baseband 04.12.05 thank you

Reply
lexi
June 1, 2013 2:15 AM

i have snow leopard 10.6.8.b and the jailbreak still didnt complete keeps stoping at “please wait please wait please wait ETC… what do i do?

Reply
Elzaeem606093
May 16, 2013 11:35 AM

Hkgsbkfs mgsgkb

Reply
Vanessa Negri
May 15, 2013 9:08 PM

PLEASE GUYS, JAILBREAK IPHONE 4S !!!!!!!!!!!!!!!

Reply
M.Hussain
May 15, 2013 1:58 PM

i have a problem to jailbreak ios 6.1.3 in my iphone 3gs i restore it using itune …..but not source i found to jailbreak ios 6.1.3 any can help ..if i use redsn0w 0.9b3 i will show such error missing key : …. how to resolve it help me !!! my iphone 16 days off due to this problem

Reply
dert
May 18, 2013 3:59 PM

had same problem, fixed by running redsn0w with administrator privilages

Reply
SugarTits
June 12, 2013 12:04 PM

howd u jailbreak it? red snow keeps telling me doesnt support untetherdoptions. but im trying to make it tetherd! im using red snow and the 6.0 ios to try and jailbreak 6.1.3 ios 3gs

Reply
Biffalo
May 15, 2013 12:59 PM

Okay, I’m getting tired of this. Every single time I jailbreak, my itouch 4th gen gets stuck in DFU mode after a couple of hours and I have to restore again. I can’t enter DFU regularly because my buttons are broken so I have to DFU my ipsw. However, DFUing the ipsw means that it corrupts the ipsw, tricking it to enter DFU. But after jailbreaking, the ipsw doesn’t seem corrupt, even though it is still. Meaning after a while, I get back into a DFU lock and I boot tethered through the computer. After I boot tethered, my device makes the usual charging noise and the screen turns on, however the screen remains a gray-ish color and I have to restore and jailbreak all over again. Is there any other way to enter DFU mode with broken buttons without having to mess up my software?

Reply
Hiperkiller
May 18, 2013 2:31 AM

You are such an idiot , he said iPod touch 3RD generation .not 4th

Reply
Maede
May 20, 2013 10:05 PM

“As mentioned above, the Redsn0w Jailbreak is compatible with, and can jailbreak, the following iPhone and iPod touch models running iOS 6.1.3. iPhone 4 (both GSM and CMDA models) iPhone 3GS iPod touch 4th generation” Hiperkiller, your reading skills are pathetic

Reply
Biffalo
May 27, 2013 11:34 AM

Someone in the comments can’t read… But going back to what I’m going through, after 8 or so hours with this JB, I get booted back into DFU mode. I’m not sure what I’m doing wrong when I follow all of the steps correctly, double that for a broken button.

Reply
Naveen
May 14, 2013 11:52 PM

Thanx dear It was very easy, now i can break up with my gf becase i have no time for her. Cydia is waitting for me

Reply
randydizon83
May 14, 2013 8:26 PM

I followed the instructions correct.. tried to do it almost 50x.. the instructions is not that hard to follow.. watched the video do precisely what it said. first select the ipsw 6.0 then jailbreak after that just boot but select the ipsw 6.0 first.. then its running and the pineapple logo appears but after that it would be stuck on the apple logo for hours, nothing is happenning..

Reply
Snuffy
May 14, 2013 1:07 PM

I got the pineapple screen but when I went to finalize the jb in my iPhone 4 gsm iOS 6.1.3 I get an error about my shsh blobs!!!

Reply
Prabhteshwar
May 19, 2013 3:42 AM

yea i got the same problem plz help

Reply
Gill
May 14, 2013 3:32 AM

Hello, i followed every steps as u showed, until last step, reboot , it says “Exploit failed”. What should i do then? HELP ~~! thanks

Reply
Alex
May 14, 2013 11:45 AM

it hapened to me too :(

Reply
denis
May 12, 2013 3:57 AM

I have this problem after I do “just boot” missing keys. plist data for this build: device: iPod Touch 4G ECID: xxxxxxxxxxxxxxx Build: iPod4,1_6.1.3_10B329 could anyone halp me ?

Reply
Ali
May 12, 2013 3:37 PM

U must select ios 6 (not 6.1.3) just boot

Reply
Ardvaark
May 13, 2013 8:44 AM

Just found out the real problem! If you update Cydia after the untethered jailbreak, you break something. It has nothing to do with choosing the 6.0 firmware. My device was working fine with this jailbreak until Cydia cried out to update 3 of its files. After I updated them I got the “”missing keys. plist data for this build:” error and could no longer use this jailbreak method. Had to restore back to stock.

Reply
jimates
May 25, 2013 9:40 PM

I ahd the same problem on an iphone 4 a few weeks ago. I did it several times before I decided to update the Cydia items one at a time instead of all 3 at once. One at a time worked great with no problems.

Reply
Ardvaark
May 13, 2013 9:25 AM

Furthermore, even after I restored to factory 6.1.3 in itunes and tried to jailbreak again fresh, got the same error. ” missing keys. plist data for this build:” Now I can no longer perform this untethered jailbreak at all.

Reply
Ardvaark
May 13, 2013 9:27 AM

It gets better!! Now I can’t even restore back to stock in itunes. My iphone IS BRICKED.

Reply
Ardvaark
May 13, 2013 9:44 AM

Ok, got itunes to restore back to stock. Had to download 6.1.3 from apple servers instead of using the 6.1.3 download from loserland. Lesson learned, don’t load childish garbage jailbreak toys from inexperienced programmers. A serious FU shout out to those programmers who almost bricked my iphone!…lol GOOD BYEE!!!!

Reply
andrew
May 14, 2013 12:28 PM

You ass. You accept all responsibility for using these tools. Don’t post in temper then 17 minutes later post again after you ‘fixed’ it. Surely it couldn’t have been your fault?! I bet you cried when it wouldn’t boot haha

Reply
Dum_phuc
June 16, 2013 12:19 PM

Serisly? U could not figure it out on ur own so other people are fail programers? If you are so much more intelligent why didn’t you come up with a better break???? Oh your not…

Reply
angelo
May 11, 2013 9:38 PM

i have everything nut when it says waiting for reboot my phone takes a long time to reboot, i made sure i had the correct ipsw and the right redsnow. i have a new iphone 4

Reply
Dayvid
May 11, 2013 3:29 PM

This guys voice is like so annoying OMG…

Reply
jimates
May 25, 2013 9:45 PM

I thought it was one the best videos I have seen. At least he spoke loud, spoke english well and didn’t sound like a 10 year old.

Reply
Chakz
May 11, 2013 11:12 AM

So i guess its not possible to jailbreak iphone 4s 6.1.3 ? :S

Reply
jarred2012
May 11, 2013 10:47 PM

not untethered. i would advise waiting until ios 6.2 or 6.1.4 which ever they release. or you can downgrade your iphone to ios 6.1.2 and then jailbreak it.

Reply
Miguel
May 10, 2013 3:50 PM

It said failed to decrypt kernel when i hit jailbrake.

Reply
Skandan
May 11, 2013 8:24 PM

yea for me to same happens

Reply
sam
May 11, 2013 9:02 PM

try change the usb port

Reply
muhammad shafi
May 13, 2013 2:18 AM

for me it comes same it sucks anyonecan please help me

Reply
InGSuarez
May 10, 2013 12:37 PM

Hi all. After that cydia was updated, applications close immediately. Cydia also, any ideas? 10x

Reply
InGSuarez
May 11, 2013 1:48 PM

After installing cydia, will ask you to update 3 packs. After hours of trial and error, I discovered that the package pcre cause is failure. not to update that shit.

Reply
Ardian
May 10, 2013 3:35 AM

3GS iOS 6.13 BB 5.16.08 I followed every letter in this tutorial and success with my 3GS with cydia installed. But, I’m stuck in no network even with my previous sim-card. so I tried using method in jokubas and niltonlaga’s comments and now I’m still stuck but on network searching and not able to do manual network selection. something I’m not try yet is changing the BB into iPad BB. Well, it’s quite risky. any suggest?

Reply
Wils
May 9, 2013 1:37 PM

Just jailbreak My iphone ios 6.1.3 using snowbreese easily

Reply
Frogman
May 8, 2013 1:42 PM

What if I don’t have a home button to put into dfu mode?

Reply
sam
May 10, 2013 1:02 AM

Then just forget about jailbreak man, til you repair it

Reply
Simen
May 8, 2013 11:56 AM

It stand error after the ”Please wait” under the encryption. ( iOS 6.1.3 iPhone Model A1332).

Reply
br
May 8, 2013 9:05 AM

in the beginning it says failed to decrypt kernel whats that?

Reply
sam
May 10, 2013 3:44 AM

try change the usb port then, it will work somehow

Reply
AJ
May 8, 2013 5:51 AM

what does key missing means?

Reply
Danny
May 7, 2013 3:12 AM

I have a problem i’ve jailbreak my iphone 4 succesfly and everything is working well cydia is ok , but when i reboot my device it doesn’t work no more Can you help me out please :)

Reply
Ashley Cathrryonna
May 7, 2013 6:07 AM

Your ios?

Reply
Raman
May 7, 2013 2:27 AM

please ! iphone 3gs ios 6.1.3 jail break ? please !

Reply
cakey
May 5, 2013 11:25 PM

I have successfully done this jailbreak on two 16gb iphone 3gs phones. However both phones randomly shut of, which is obviously annoying as the unlock I did with ultrasn0w won’t work until I use just boot again. Anyone else had random shut offs?

Reply
jorge
May 10, 2013 10:07 AM

Reply
Steven
May 22, 2013 2:53 PM

Random shut offs often are a symptom of a dying battery. Have either of these 3GS’s had their battery changed?

Reply
TheFeee
May 5, 2013 8:17 PM

I dont see the file iOS 6.0 IPSW for the Semi Untethered 6.1.3 Jailbreak? I Downloaded from the step about but when I go to the file to select it I don’t see it?

Reply
TheFeee
May 6, 2013 9:46 AM

Never mind, after reading another website I had to change the file extension from .zip to .ipsw and it read it. Wish that was in the instructions. Now can seem to get the iPhone 3GS to boot into DFU mode in step 5 above. Keep getting dam ITunes logo to connect to iTunes. Any suggestions???

Reply
blur
May 25, 2013 8:45 AM

You’re entering Recovery mode, you need to enter DFU

Reply
Ashly
May 5, 2013 4:14 PM

how do you download apps from the itunes store without paying for them after the ipod is jailbroken? Help!!

Reply
bombman
May 6, 2013 6:00 AM

Buy an itunes card

Reply
Derek
May 10, 2013 6:34 AM

install the hackulous source on cydia then install installous 5 and that should do it

Reply
Steven
May 22, 2013 2:55 PM

Installous is not longer available or supported. Try AppCake.

Reply
zhen
May 5, 2013 9:55 AM

My device is stucked on the apple rebooting screen “the one after the pinnaple” in the second part where we have to use Just boot to make the jailbreak permanent. does anyone have the same issue? Is there a solution for this? thanks

Reply
Sahil M
May 5, 2013 4:57 AM

it works great! followed the procedure exactly!! thanksss!!!

Reply
coni
May 5, 2013 9:00 AM

cydia tweaks ????? for unlock

Reply
Katherine
May 5, 2013 2:44 AM

This is so confusing I need help because I don’t understand how up do this someone please help me!!!

Reply
Sahil M
May 5, 2013 5:00 AM

jus follow as said without misssing n e thing!

Reply
Blade01234
May 4, 2013 5:06 PM

I cant download apps from the App Store, app cake, Zeusous, vshare, etc. it d/l 2/3 of the way then stops. did i mess something up? I have cydia and can d/l from cydia but no apps are being allowed.

Reply
Simon
May 4, 2013 10:24 AM

Hi everyone, I had jailbroke my sister’s iPhone 3gs back when it was in 6.0.1, earlier this weeks she found it would be a great idea to upgrade to 6.1.3 via Itunes… Of course the phone was locked, I spend hours on it and finally jailbroke it and restore. It worked for a day or so, now the phone is stuck on the apple logo, I tried for the all day to fix it… I haven’t found anything that worked. I do not intend to spend my all week on her phone for an update… I’d like to restore it, but I’m missing the shsh that haven’t been saved, do anyone knows where I could download one? Thanks

Reply
bombman
May 6, 2013 6:03 AM

my butthole

Reply
Alex
May 6, 2013 6:21 PM

go back and select the 6.0 file on your computer and click just boot and right when the apple logo pops up do what it says 3 secs power button 10 secs power-home button 15 secs home button and hold it until first stage is complete

Reply
Mike
May 4, 2013 9:32 AM

Did everything EXACTLY like the video. used 6.0IPSW. everything worked EXCPET now i have a tethered iphone 4 with no Cydia. I have rebooted 10000 times with and without using redsnow………..email wont work if not booted with redsnow but no Cydia…

Reply
DaPhuc?
May 4, 2013 7:05 AM

Where the fuck is the download page?

Reply
truong_marl
May 4, 2013 6:40 AM

i got a stuck on “uploading logo” after pressed jailbreak, what should i do?

Reply
maja
May 2, 2013 1:23 AM

i was able to activate and jailbreak my iphone 4 to 6.1.3 version but couldnt find the CYDIA on the iphone like it was when on 5. hope nothing is wrong with my phone cos i cant unlock it now without cydia i guess

Reply
jeff
May 1, 2013 5:36 PM

The link at the bottom of the article for the Mac download (Redsn0w 0.9.15b3) takes me to a page for the Windows download. …Or am I missing something?

Reply
Xxmata
May 3, 2013 9:27 AM

You shall download that , in .rar file it has both win and mac

Reply
cyup
May 1, 2013 5:30 AM

Hi, I don’t like the fact that if I run out of battery I have to use a computer to boot my Iphone and be able to use cydia and safari. I mean I do not carry a laptop with me all the time. I am just wondering if there is a tweak which can freeze the phone when battery is 20%, the screen stays Black, All running apps get terminated, CPU and GPU is on absolute minimum. When the IPhone gets charge over %20, screen unfreezes, and lights back and everything works as it should. I would pay for such a teak as it would be very useful for any Tethered Jailbroken Iphone. I guess that at %20 Battery charge, the phone survives up to 7 or 8hours (with minim power consumption) Which is enough time to look for a charger and get it charged before, the battery is flat.

Reply
Steven
May 22, 2013 2:58 PM

I suggest you get an external support battery for backup power. Look on Amazon, they have a ton.

Reply
john
April 30, 2013 5:12 PM

how do i know which one of the firmware to download am on 6.1.3 ipod touch 4g whether its the 6.0 are what

Reply
kr
April 29, 2013 6:46 PM

cant get it too work doesnt goto pineapple screen just goes back to normal apple crap help!!!!!!im doing everything the exactsame as video

Reply
alen
May 1, 2013 1:05 AM

hey Remove USB cord as its going though the white writng cascade of info then all will be sweet and finish installing propely

Reply
Spencer
April 29, 2013 5:54 PM

I’m having some issues. I am on 6.1.3 on an iPhone 4. I went through the steps but when it came to the part of my iPhone doing the rest of the jailbreaking all I saw was “please wait” scrolling down forever and then the apple logo. I never saw a pineapple. Anyway so then I go to boot tethered (I selected the IPSW 6.0 again) and when I boot it it just says “exploit failed”. What am I doing wrong??

Reply
Janell
April 30, 2013 8:07 PM

I am having exact same problem - iphone4 GSM model….

Reply
Alex
May 6, 2013 6:27 PM

hold home button until first stage and second stage are complete

Reply
Alexis
April 29, 2013 4:43 PM

ok i do all the steps right and when i get to where the pineapple is on my device’s screen it doesnt finish the stuff its doing and after a few seconds it goes to the apple and turns on. no cydia shows up or anything.. i also tried the just boot and still nothing. ive tried over and over and over again and it wont work!!! HELP.

Reply
Alexis
April 29, 2013 4:56 PM

omg nevermind i got it :)

Reply
jordan
April 30, 2013 3:04 PM

what did u do to fix it, I am having the same problem

Reply
niena
April 29, 2013 3:13 AM

i just bought ipad mini last three weeks, and i quickly jailbreak it. i was so happy that i downloaded many things from cydia. suddenly my ipad dead. it won’t open, its stuck with the apple logo. ive use all the method shown on the internet and my last one was to restore it and it was updated to the latest 6.1.3 version. i’ll do anything for my ipad mini to have a jailbreak. included wasted my money on the fake icysn0w. now my ipad mini was left behind. the reason i bought it was to use cydia, but now the excitement gone. its fun although it only last for a day :(

Reply
Joe
April 28, 2013 7:14 PM

Is there any possible way to go back to ios 6.1.2 ?

Reply
Unsa
May 2, 2013 3:34 PM

This is what I need to do for my iPod Touch 5 too! Help.

Reply
Kline
April 27, 2013 9:30 PM

I don’t know if i’m doing something wrong or not, I downloaded the latest version of redsnow and 6.0 ipsw but when i click the ipsw, it says this version of redsnow is not supported and i tried download older version of redsnow and it still says the same thing

Reply
Michael
April 28, 2013 9:46 AM

try the latest version of redsnow,not the oldest ones,because they are old and not compatible with new ipsw 😉

Reply
Creighton
April 26, 2013 11:57 PM

When is the evasi0n 1.6.3 jailbreak going to come out? i tried to use redsn0w on my ipod, but that just screwed it up major.

Reply
waht?
April 26, 2013 6:14 AM

Works well but how can I remove it?

Reply
sam
April 26, 2013 7:11 AM

Restore with 6.1.3 back on itunes

Reply
John
April 26, 2013 6:03 AM

When I arrive at the jailbreak my iPod puts me .error! Please reboot the device into normal operating mode, then perform a clean “slide to power off” , then try redsnow again.

Reply
sam
April 27, 2013 8:23 AM

try change port then enter DFU mood correctly

Reply
Soumitra
April 26, 2013 5:16 AM

Hi, I followed everything and cydia is installed in my iphone 4 (ios6.1.3) but still its showing locked to telenor 14.0 and no service with new sim card. Please help .. :(

Reply
sitha chhith
April 26, 2013 3:06 AM

i did everything correctly but then when it hits “waiting for reboot” it gets stuck am i doing something wrong please help.

Reply
dasWhite
April 25, 2013 9:41 PM

Okay so I’ve tried to do it several times but I keep getting stuck on “Uploading first page”… and absolutely nothing is happening. iPhone 4 6.1.3 Semi untethering…

Reply
sam
April 25, 2013 1:19 PM

YEAH, NOW I CAN ENJOY THIS JAILBREAK XD THX evasi0n!!

Reply
Jesse
April 25, 2013 9:06 PM

i am stuck on dfu area it says ” uploading first stage” and my iphone 4 is still pitch black… and it didnt say done yet because the build is still being processed. not if it is frozen or what!?!?

Reply
sam
April 25, 2013 9:46 PM

Maybe you should try undo, change the usb port, i used to get this problem “failed to exploit” and ” failed to decrypt kernel” suddenly i change the usb port then just like that i can jailbreak. Never experienced your problem, sry -.-‘

Reply
Johny7
April 26, 2013 2:02 AM

100% correct dude. just change port. Don’t forget to select the correct ipsw every time.

Reply
sam
April 26, 2013 5:20 AM

Yup :)

Julien
April 25, 2013 6:44 AM

When I arrive at the jailbreak my iPod puts me .error! Please reboot the device into normal operating mode, then perform a clean “slide to power off” , then try redsnow again.

Reply
Gaurav
April 25, 2013 1:09 AM

I hav iphone 4 and is jailbreaked using redsnow fom diffrent comp At my place i hav a my laptop through which i try to boot it as it was swiched off..but its showing an error… I evry time hav to do it with the computer through which i jailbreaked… How can i do it with my laptop.. Hav installed all the softwares needed to boot but it stops at the last step… Plz help

Reply
iphone 3gs
April 24, 2013 9:25 PM

Can anyone help me as regards to what features does the limited functionality of the semi-untethered jailbreak include??Mainly, if I boot without connecting to the computer then can I make calls at least(if I am outside and do not have my laptop)?? I use a 3gs. Any help would be appreciated.Thanks

Reply
Malaysia Rock
April 24, 2013 3:14 PM

Hi! I’ve downloaded both the Redsnow and iOS 6.0, but when I try to put in my IPSW my computer wont let me pick it. I cant even see it.. HELP PLEASE!

Reply
Julien
April 24, 2013 12:37 PM

When I arrive at the jailbreak my iPod puts me .error! Please reboot the device into normal operating mode, then perform a clean “slide to power off” , then try redsnow again.

Reply
Colin3699
April 24, 2013 12:18 PM

I tried this about 7 times (literally) and everytime it says “waiting for reboot” then right after my ipod loads up the apple logo it says “Exploit Failed” How Do I Fix?? Please Help

Reply
Bs
April 24, 2013 9:13 AM

Make a jailbreak for iOS 6.1.3 on new devices!! it will help a lot of us.

Reply
Evasion Admin
April 24, 2013 11:07 AM

Sorry, but it doesn’t work that way. Evasion Jailbreak is simply a blog that is dedicated to providing its readers with the best possible tutorials on the web. We are, in no way, associated with the evad3rs or any other developers on the jailbreak scene. Thanks for reading and have a great day!

Reply
rose7777
April 23, 2013 9:19 PM

can I install cydia without jailbreak ios 6.1.3 in iphone 5,???????? answer me plz

Reply
Alex
May 6, 2013 6:28 PM

i’m sorry but no

Reply
Shine
April 23, 2013 5:01 PM

So I can’t download this if I don’t have a computer? I have a 5th gen iPod touch with ios 6.1.3. I really need to unlock my ipod, it doesn’t say anything about the 5th gen.. Should I just go buy a computer? I’d rather not! Is there anyway I can download this directly from wifi?

Reply
Jacob
April 24, 2013 7:09 AM

No you need a computer Just go to a public library and a computer there if you don’t have one

Reply
dwayne johnson
April 24, 2013 2:08 PM

just stop trying person.

Reply
Zane
May 15, 2013 12:15 AM

Fifth gen devices don’t get a 6.1.3 jailbreak. the exploit used in this semi-untether isnt present in the fifth generation devices

Reply
bmilano10
April 23, 2013 4:11 PM

I did everything correct but when I get to the Pineapple reboot screen, it sits there for about an hour, goes to the apple logo, turns on but has no cydia. Does anyone know how this happens? Iphone 4

Reply
bmilano10
April 23, 2013 4:19 PM

It also skipped the moving application parts and all of the parts after that until the reboot,

Reply
Jacob
April 24, 2013 7:10 AM

It’s tethered so you have to reboot it again for cydia to show up

Reply
C37RO
April 24, 2013 7:11 AM

I had the same problem what I did was to jailbreak with sn0wbrezze

Reply
Lichgates
April 24, 2013 11:04 AM

I also got that problem, i restored my device. Maybe i try again, some know how to fix it?

Reply
che
April 23, 2013 2:42 PM

how do i ‘simply point Redsnow at the iOS 6.0 IPSW, not 6.1.3’ ? i cant seem to find it and the jailbreak wont work without it

Reply
Evasion Admin
April 24, 2013 11:08 AM

Download iOS 6.0 from the link given in the Jailbreak Downloads section.

Reply
Sam374
April 23, 2013 1:18 PM

did anybody get the website he typed in?

Reply
Dazed
April 23, 2013 12:26 PM

Nice Tutorial! Thanks! Here is the ODD part for me. I tried this Jail Break on an old iPhone 3GS that the previous owner already upgraded to 6.13. I went through the steps as outlined, only on my 3GS - RedSn0w had an additional prompt if I had the new BootRom or the Old. Looking at their instructions, I checked the serial number of my device, and the key digits were 36, meaning it was the older BootRom. So I answered NO it was not the new BootRom, and continued along with the Video. Unlike the instructions above, after reboot the video said it was important to close and relaunch RedSn0w, then choose the the IOS 6.0 firmware file again, and then use the “Just Boot” option and DFU mode, which I did. I waited and eventually RedSnoW reported “Exploited Failed” and the device seemed stuck on the Apple Boot screen. After a few minutes, I unplugged the USB cable and almost forced the device off. Glad I didn’t! I waited a little longer and the device came back up. I figured I had a limited device and would need restored, but much to my surprise it was in fact Jail Broken, and Cydia and all other applications worked fine. Now the really ODD thing, is this seems to have resulted in a Non Tethered JB. I can turn the device completely off and on and the JB is still in place without a computer, Cydia and all applications still work perfectly. Perhaps a bug or sequencing issue? Either way, I am very happy!

Reply
jono
April 23, 2013 5:23 PM

its because you have the old bootrom, 3gs’ with old bootroms are the best as they can be exploited much easier than new bootrom, also i think they can be unlocked easier although all 3g and most 3gs’ can be unlocked very easily when jailbroken since ipad baseband downgrade from 06.15.00 to 05.13.04 became available.. Jono

Reply
sam
April 23, 2013 11:32 AM

Help me pls with failed to decrypt kernel!! thx!

Reply
corey jones
April 23, 2013 7:23 AM

whenever I lock my iphone for a few minutes it always shutdown is there a way to fix this iPhone 4 CDMA ios6.1.3 untethered jailbreak

Reply
sam
April 23, 2013 4:02 AM

guys, i got this problem “failed to decrypt kernel” what should i do? currently using iphone 4

Reply
jason
April 22, 2013 6:18 PM

im currently trying to jailbreak my phone im at the page where it says please wait while your build is being processed its stuck on uploading first stage and has been stuck there for almost 10 minutes is anyone able to help?

Reply
Ryan
April 22, 2013 8:58 AM

I have an iPod touch 4g running ios 6.1.3. I accidentally upgraded my software from 6.1.2 to 6.1.3, I had my iPod jail broken before I updated. I follow the steps to a Tee. But when jail breaking, it shows the pineapple, and a little bar underneath it showing progress from, installing cydia, to moving applications and all of that. It is supposed to take like 5 minutes for that process, but when I do it, it goes straight from Installing Cydia, to rebooting, and skips moving apps and the other things. It takes like1 minute on mine, so that’s how I know it’s not working, what can I do? Thanks in advance guys, and girls.

Reply
kumiko
April 22, 2013 7:54 AM

hello. would jailbreaking my iphone delete my apps’ data? thanks :)

Reply
quentin
April 22, 2013 6:13 AM

voila aller voir la video de kushwonka il jailbreak puce a4 et a5 sur ios 6.1.3 il la trouver aller voir aller voir vous serer pas dessu

Reply
John
April 22, 2013 5:03 AM

Hi, i followed all the steps, it works. but it says “No service” or “Searching..” what can i do?

Reply
C37RO
April 21, 2013 10:56 PM

I Have a problem Im from Mexico but I have a iPhone from USA I don’t have the chip for unlock it i was working nice with 4.1.1 version but Facebook isn’t working in that version so I Update my iPhone and when i try to get in appear the language wizard and in Wifi I cant select any because doesn’t appear any and when I try to jailbreak the iPhone goes everything ok until a letters Please Wait appears then in a while appear some letter that I don’t remember and the divice reset appears apple logo and start in the same language wizard please help and sorry for my english

Reply
Danella
April 21, 2013 6:34 PM

I installed it and followed the steps EXACTLY and when it’s on the first loading screen with all the words and “please wait…”s , it fades and goes to the apple icon and turns on. I tried rebooting and I don’t see the cydia app :(

Reply
C37RO
April 24, 2013 7:14 AM

I had the same problem what I did was to jailbreak with sn0wbreeze

Reply
SppBenz
April 29, 2013 6:18 AM

I have the same problem right now and I think, that my iPhone 4 still ain’t jailbreak yet or is it already jailbroken? What should I do next? Best regards, Benz

Reply
Henk17
April 21, 2013 12:54 PM

Stop making tutorials and just make a jailbreak for 6.1.3. It would help out a lot of us guys. Then warn all of them to don’t update to the next update untill ios 7.

Reply
Daremo Sensanome
April 21, 2013 8:50 AM

REMEMBER. To use “just boot” is ALWAYS necessary to “select IPSW” before proceed.

Reply
josh
April 21, 2013 2:44 AM

I finished all the proceedures but then I went to cydia it says it has 3 essential upgrades… do I upgrade them or not?

Reply
Mario
April 21, 2013 1:12 PM

Yes

Reply
Prashanth
April 20, 2013 10:48 PM

Is it possible to jailbreak ipad 2 running ios 6.1.3. Please say me how

Reply
ab
April 21, 2013 11:20 AM

ya you fuckin retarded son of a bitch

Reply
me
April 24, 2013 3:54 PM

go and fuck a goat wank stain

Reply
D33SNUTS
April 20, 2013 10:30 PM

hey man thanx for all the help, jailbreak went flawless. only question I have is for an unlock.will an ultrasnow unlock work with 6.1.3 firmware and if so do u know the source. thanx.

Reply
Wyatt
April 20, 2013 7:15 PM

What is the link for redsnow

Reply
Wyatt
April 20, 2013 7:14 PM

What is the link for red snow

Reply
Pamela
April 20, 2013 4:19 PM

ok I did the DFU mode and my phone completely shut off and it won’t turn back on!!!

Reply
Bob
April 20, 2013 5:44 PM

Easy fix hold power and home button till apple logo comes on

Reply
Kellogs
April 20, 2013 2:35 PM

I cant seem to find the 6.0 firmware, only the 6.0.1? is this the right one or not? im using a 4g ipod

Reply
Tony V.
April 21, 2013 2:00 PM

Yes it will work, make sure you select ispw before “just boot” also..

Reply
aewalatup
April 20, 2013 11:40 AM

Same problem here. I followed all the steps, exactly as the video, but no Cydia appears after the tethered boot.

Reply
Tony V.
April 21, 2013 2:01 PM

Try a regular boot, then “just boot” again, make sure you select ispw before “just boot” also..

Reply
julia
April 20, 2013 10:40 AM

guys, i did the steps, but when i boot, cydia just doesnt show up… funny thing is i can see the battery percentage that i enabled, but not cydia… what can that be? Thanks!

Reply
julia
April 20, 2013 10:41 AM

ps: i tried booting over and over again and still nothing

Reply
Tony V.
April 21, 2013 2:02 PM

Try opening safari, if it crashes or doesn’t work the jailbreak did go through. Try booting it regularly just turn your idevice off then on again. Then try “just boot” make sure you select ispw before “just boot”.

Reply
Romosexual
April 19, 2013 4:38 PM

I did everything correctly and Redsn0w gets stuck on the rebooting after it uploads the second stage. I had previously jailbroken the same device on an earlier IOS. Any ideas about what might be going on?

Reply
sebas
April 19, 2013 3:59 PM

hi, im running it on mac and it says that the ipsw is not supported by that version of redsnow, any help?

Reply
noah
April 19, 2013 1:58 PM

Stuck on pineapple reboot icon….

Reply
David
April 18, 2013 11:40 PM

Yall should use the sn0wbreeze method, had no problem with that.

Reply
noah
April 19, 2013 1:55 PM

Is there a snowbreeze for mac?

Reply
Benedict
May 11, 2013 4:51 PM

no only for windows

Reply
Oscar
April 18, 2013 11:28 PM

I keep getting a message saying the kernel cannot be decrypted. I don’t know what to do. Help

Reply
Will
April 21, 2013 8:18 AM

I do too, please help.

Reply
Nelson
April 18, 2013 12:04 PM

Screw it im waiting for new Evasi0n or what ever its going to be called

Reply
asis
April 18, 2013 11:40 AM

hi , I finished all the steps and im looking for Cydia but theres no Cydia. Cydia is missing . pls help.

Reply
heb1234
April 18, 2013 2:35 PM

happened to me too. did you boot it? try that, im currently doing that now

Reply
trevor
April 18, 2013 6:47 AM

i keep getting sim not valid? then no service. it must be something really small and stupid i am doing wrong. is there something else i should do so it take a sim from a different network? thanks

Reply
Shad
April 18, 2013 7:23 AM

Does anyone know why my iphone 4 freezes at the please wait screen when it is coding.

Reply
rodas
April 23, 2013 5:41 AM

just wondering if ur unlock was factory unlock because if its not then …..well, ur screwed

Reply
hizami
April 18, 2013 5:12 AM

i have follow all the steps, but i still cant open cydia. it keeps crashing every time i tried to open it. and safari is not working properly, cannot browse.

Reply
simply
April 18, 2013 1:31 PM

you need to open again the redsnow then go to the EXTRAS then click JUST BOOT follow the instruction…..hope i can help …

Reply
Jessica
April 17, 2013 10:04 PM

Hello guys, I’ve done all steps and now I am stuck on ,,Waiting to REBOOT” :’( My iPhone 4 (6.1.3)(GSM) is shining with dark black, and Apple logo shoud come up but but its doing nothing :/ My phone is freezed and I have to restart it with holding Power and Home button :/ What shoud I do now ? Please help

Reply
jimmy
April 18, 2013 2:25 AM

my ipod had freeze before and this is how i solve it. 1 wait until the device is out of power, 2 get your restore file ready 3 put your device in recovery mode. if you dont know how to get in recovery mode, go check on youtube. 4 use itunes to restore. if u dont know how to restore, go on youtube and check. btw my english is not that good, please excuse

Reply
From Korea
April 17, 2013 9:38 PM

it works Perfectly without a flaw. It worked on my iPhone 4(IOS 6.1.3) using the 6.0 ISPW for the jailbreak and the just boot. Just follow the tutorials, then it should work fine. I had few problems in the beginning because I had a bad usb, but it worked fine after trying few more times with holding my cable tightly. Thanks again for this awesome tutorial. Thanks.

Reply
Josh
April 17, 2013 3:35 PM

I have been at the downloading Jailbreak data for a while now… How long should it normally take on an iPhone 4 going from 6.1.3 to the 6.0 os?

Reply
two_pic.heart
April 17, 2013 3:34 PM

i did not get step 2 . how to do step 2 in windows 8 . please anyone help me .

Reply
two_pic.heart
April 17, 2013 3:21 PM

I didn’t get step 2 .Does anyone help me how to do that on windows 8.please help me

Reply
johanny
April 17, 2013 1:50 PM

im honestly gonna give up.. every time i click on select IPSW and select the 6.0 IPSW it says “That IPSW is not supported by this version of RedSn0w” :/ Idk what to do.. Help?!!?!?

Reply
Paul
April 17, 2013 10:00 PM

Omg that|s so easy. Just download another version of RedSn0W…

Reply
David
April 17, 2013 1:38 PM

I did all, but when rebooting via ‘just boot’ with redsn0w, after the pineapple logo stage, the phone just gets stuck on that apple logo start-up stage for hours. I have to hold home and power button to blank it out, then turn it on normally (cydia ends up not showing because i didn’t boot with redsn0w) How do i fix this error please? I’m doing nothing wrong. I chose 6.0 ispw not 6.1.3 It’s an iPhone 4 Thank you to anyone who can help.

Reply
Paul
April 17, 2013 9:18 AM

Hello guys, I’ve done all steps and now Iam stuck on Waiting to REBOOT :'( MY iPhone 4 (6.1.3)(GSM) is shining with dark black, but its doing nothing :/ What shoud I do now ? Please help

Reply
maury
April 17, 2013 7:09 AM

Hola a todos, tengo un iphone 4 ,con plan de datos de la compañia vomistar en Chile , que sucederia si le hago jailbreak RedSn0w Semi Untethered ? … pierdo mi plan :S ?? y si en caso que realizara jailbreak, hay que sacar el microchip ?

Reply
Daremo Sensanome
April 17, 2013 11:06 AM

Preferible que los saques aunque no tiene nada que ver. Solo para que hagas la wea mas tranquilo. Te felicito por lo de Vomistar, que no tendrían porque enterarse que hiciste el jailbreak ya que por ser semi-untethered no deja rastros en el equipo. Todo es externo al equipo y se le hace creer que es un IOS 6.0 aunque adentro haya un IOS 6.1.3. Por si acaso yo tengo un Entel PCS que son mas acuciosos que los de Vomistar (jejejejejejeje).

Reply
Daremo Sensanome
April 16, 2013 6:01 PM

I’ve read lots of complaints and just few good words about this procedure. Such is my case. I did the procedure as it’s explained in THE VIDEO which has been my key to succeed. It took me some time to put my iPod Touch 4G IOS 6.1.3 in DFU mode. I succeed following the times marked in the software instead of count seconds. Follow the video… is my suggestion to get your goal. In this moment I’ve ended the installation of XBMC, which was the reason for jailbreak the device. Work fine!!! Thanks to the creator of the procedure!!

Reply
chriz
April 21, 2013 9:46 AM

all yall so stupid its simple FOLLOW THE VIDEO its not rocketscience i did it perfectly

Reply
Shawn
April 16, 2013 12:42 PM

How long does it take to download the jailbreak data? I been sitting here 10 min at this screen and nothing yet lol

Reply
Lilly
April 16, 2013 5:28 AM

Hi, all was going great. But now I am stuck at: Please wait while your built is being processed. Uploading first stage IS there any help?

Reply
Shawn
April 16, 2013 12:43 PM

I got pass that but now i’m stuck at rebooting

Reply
Case
April 16, 2013 1:41 AM

I did everything and it worked but after the dfu portion it stops at uploading first stage (i’ve done it like 5 times) what do i do?!?!?!

Reply
chriz
April 21, 2013 9:47 AM

idiot

Reply
James
April 15, 2013 11:12 PM

Thanks for the work! I just picked up a great deal on a used iPhone 4 to replace the old 3gs workhorse. Darn the previous owner had just updated to 6.1.3 Frikkin hell. Anyway the semitether worked for me! Now I can limp along till iOs 7 with a full untethered JB. Thanks again!

Reply
t-rex
April 15, 2013 11:00 PM

it went all good… cydia was installed.. but all my stock app icons were lost.. now what to do?? how to get them back.. please help…!!!!

Reply
page
April 15, 2013 6:12 PM

Ok I got it to do the jailbreak but when it does it it does not do the move the application thing with the running pineapple it just says please wait over and over again for like 15 - 30 min then it just does a bunch of words then reboot when I try to just boot it just stays on the pineapple that never does anything I’m confused iv’e done it several times please help

Reply
pxed
April 15, 2013 5:39 PM

so i have iphone 4 ios 6.1.3 but i followed directions on how to semi tether jailbreak but i cant!!!!! and i have done jailbreak alot. so i put redsnow compatibility to windows xp service 2 then i open go into extras selete ISPW 6.0 then i everything goes well untill it stops at waiting for reboot… i done this more then 8 times (COUNTED) and still nothing… phone stucks at a weird black screen and nothing happens!!1… please help please

Reply
Daremo Sensanome
April 15, 2013 4:12 PM

Can you please write down the source inside Cydia?

Reply
heb1234
April 15, 2013 2:22 PM

Hi. I tried to download redsn0w on my Windows 8 laptop. it said the download is done, but I can’t find the program in my computer. The icon hasent even appeared on my screen. Help!

Reply
Sophie
April 15, 2013 8:21 PM

Okay so, if you open up the Start icon on your tool bar, you can search in the box for the program. If that doesnt work, check your files. Hope I helped!

Reply
Jokubas
April 15, 2013 10:29 AM

I have 3GS. I followed this tutorial, then did “Just boot” but still “No Service”. Cydia and other apps work fine. Any suggestions?

Reply
Jokubas
April 15, 2013 10:48 AM

Other forums said to reinstall ipad baseband. Will it work?

Reply
niltonlaga
April 15, 2013 4:00 PM

1.Open cydia and let it complete loading 2.Go to ‘Changes’ page (bottom middle of cydia) 3.Tap ‘Refresh’ in the top-left corner 4.Wait for cydia to finish loading. If you get an error, tap refresh again. 5.Tap search, find and install ‘ultrasn0w’ (it’s zero, not capital o’s) 6.Reboot iPhone (tether)

Reply
Jokubas
April 16, 2013 3:48 PM

Thanks for helping but this method doesn’t work.

Reply
Jokubas
April 17, 2013 3:02 PM

If anyone has this problem, try to reinstall ipad baseband. That worked for me. But first of all check that it is compatible with your model.

Reply
page
April 15, 2013 7:39 AM

i started the jail break and now it has been on the waiting for reboot screen for a while now whats up with it?

Reply
adonis
April 15, 2013 5:21 AM

Thanks, but how the above steps would change if u have iphone4 unlocked with old gevey sim? and how should one preserve the base band before upgrading to 6.1.3 from IOS 4.3.3 with firmware 4.10.01? Any help will be much appreciated.

Reply
Shay0874
April 15, 2013 1:37 AM

I was able to jailbreak with no issues but now i am getting no service on a straight talk sim. Any ideas? Phone calls will not even work.

Reply
krisna
April 15, 2013 1:02 AM

i can’t add THEBIGBOSS.ORG/SEMITERTHER at iphone 3gs. it’s says” did not find repository” please help me

Reply
antonsoxx
April 15, 2013 3:07 AM

maybe the server is busy,try aganint! everything is ok if you got and can open cydia. or you can skip that repos

Reply
Kayla
April 15, 2013 3:08 PM

You spelled it wrong

Reply
James
April 20, 2013 4:11 PM

I think it’s tether…?? And if you are on 3 uk payg the repo is blocked by the content filter unless you unlock by credit card or use a vpn

Reply
randydizon83
April 14, 2013 11:53 PM

finished the jailbreak and the just boot with the ipsw 6.0 but stuck on the apple logo after the small pineapple disappeared.. been waiting for hours but nothing happened just stuck on the apple logo

Reply
Antonsoxx
April 15, 2013 12:08 AM

Will work perfectly if you followed correctly. It worked on my iphone4

Reply
Evasion Admin
April 15, 2013 2:18 PM

Glad to hear, thanks for reading 😀

Reply
antonsoxx
April 15, 2013 10:11 PM

thanks :)

Reply
randydizon83
May 7, 2013 8:53 PM

followed the instructions correct.. tried to do it almost 50x.. the instructions is not that hard to follow.. watched the video do precisely what it said. first select the ipsw 6.0 then jailbreak after that just boot but select the ipsw 6.0 first.. then its running and the pineapple logo appear but after that it would be stuck on the apple logo for hours, nothing is happenning..

Reply
Evasion Admin
April 15, 2013 2:18 PM

Are you sure you followed the tutorial correctly? Try booting tethered.

Reply
Kayla
April 15, 2013 3:10 PM

The pineapple logo with the loading applications didn’t show up, what do I do?

Reply
Kayla
April 15, 2013 3:11 PM

The pineapple logo with the “moving applications” applications didn’t show up, what do I do?

Reply
Kayla
April 15, 2013 3:12 PM

The pineapple logo with the “moving applications” applications didn’t show up, what do I do?

Reply
Tyler
April 14, 2013 11:12 PM

thank you very much, man. this definitely worked for me. respect :)

Reply
Antonsoxx
April 15, 2013 12:05 AM

You’re welcome man :) Glad can help

Reply
tensai
April 15, 2013 11:33 AM

hey but when the 6.1.3 untethered jailbreak release???

Reply
Wyatt
April 20, 2013 7:17 PM

What is the link for redsnow

Reply
Ian
April 14, 2013 5:37 PM

I keep getting a message saying that “that ipsw is not supported by redsnow” everytime i try to select the ipsw in the redsn)w app. I have an Iphone 4s which has already been updated to ios 6.13. I am using redsn0w 9.15b3, and have already downloaded the ipsw file 6.1.3 for my phone…could you help me to figure out what i’m doing wrong?

Reply
antonsoxx
April 14, 2013 7:30 PM

iphone 4s cannot jailbreak by redsnow. you should wait fore new release by evasion. this tutuorial only for iPhone 4, 3GS, iPod Touch 4G

Reply
Ian
April 14, 2013 7:38 PM

Thanks, i appreciate the response. Is there anyway to do a tethered jailbreak?…or downgrade?

Reply
antonsoxx
April 14, 2013 7:56 PM

I RECOMMEND WAIT FOR NEW RELEASE. MAYBE A FEW DAYS LATER. DOWNGRADE OR ANYTHING ELSE JUST MAKE YOU WASTING YOUR TIME. SO MUCH TROLL ON INTERNET ABOUT JB IOS 6.1.3 LIKE ICYSN0W ETC

Reply
johanny
April 17, 2013 1:57 PM

okay, this is happening to me, but i have an iphone 4

Boogie noodle
April 14, 2013 4:08 PM

Is there untethered jailbreak for 6.1.3 iPod touch 4g?

Reply
antonsoxx
April 14, 2013 7:57 PM

SEMI-UNTERTHERED BRO

Reply
tensai
April 15, 2013 11:38 AM

but but when the 6.1.3 untethered jailbreak release???

Reply
Boogie noodle
April 14, 2013 4:06 PM

Ca

Reply
am200001
April 14, 2013 10:34 AM

I have Tried all options but still I am getting error ” Exploit Failed”. When I go back and check the status on Redsnow, it says Connect iPhone (Soft DFU Mode). This is Iphone4. Please Help.

Reply
am200001
April 15, 2013 9:36 AM

Please advise how can I fix it? Thanks!

Reply
Kayla
April 15, 2013 3:14 PM

You might have not gone into DFU mode correctly, make sure on the last step you hold the home button down for at least 10 seconds even if the load screen appears

Reply
Kyle
April 14, 2013 9:42 AM

I have gone through the entire process without any problems and still don’t have Cydia on my springboard. any ideas?

Reply
Tyler
April 14, 2013 1:11 PM

i had the same probs, everything went v?ry smoothly every single steps but then there was still no Cydia installed. need some helps!!

Reply
antonsoxx
April 14, 2013 7:59 PM

CHECK MY NEWEST COMMENT

Reply
Misjarueeb
April 15, 2013 1:48 PM

I did read your latest comment… I folowed these steps a few times now. Still cydia is not installed… ipodtouch 4g, redsnow 0.9.15b3, iPod4,1_6.0_10A403_Restore.ipsw Any ideas how i can get cydia on my device? Sorry to bother you Misja

Reply
antonsoxx
April 14, 2013 2:45 AM

thanks i just jailbreak my iphone 4 ios 6.1.3. 😀

Reply
khohul
April 14, 2013 5:41 AM

is it tethered or not

Reply
antonsoxx
April 14, 2013 7:27 PM

semi unterthered man

Reply
Gabriel (Brazil)
April 13, 2013 10:54 AM

not saved SHSH and accidentally updated to ios 6.1.3, as I still have to go back to ios 6.1.2? (downgrade without SHSH saved)? Thank’m awaiting

Reply
sabrina
April 13, 2013 10:26 AM

Hi! I love jailbreaking my ipod 4G and I am kinda obsessed with apple. Since I don’t own a mac, yet I just recently downloaded Safari from apple on my Windows. I use it instead of using IE or GC. So should I press mac or windows, I wasn’t sure if it mattered. Thanks!

Reply
fork
April 14, 2013 5:00 PM

You’ll want to choose windows, when you have an option to download a file for mac vs a file for windows, it isn’t referring to the web browser you’re using, it’s referring to your operating system (xp, vista, windows 7, etc for windows and os x for mac) So if you have a windows computer or a computer RUNNING a windows operating system, you’ll want the windows download.

Reply
Alex
April 13, 2013 9:38 AM

I’m stuck on waiting for reboot and it’s been here for a while what do i do?

Reply
sabrina
April 13, 2013 10:38 AM

just wait, watch tv. It will finish soon.